Centre Console Assembly for BYD Qin PLUS DM-i, OE 15618299-00

The fitment table on this page lists the Qin PLUS DM-i and stops there. A console body is cut around one set of controls and one gear selector, so it does not travel between models the way a fastener might. If your car is a close relative rather than the same thing, check the number on the console you are removing against 15618299-00 before ordering. Where you cannot read it, or it disagrees, send a photograph of it through the quote route and let us match it.

It may. HA5H-5305100-00YBM is held here as an alternative reference for this console body, so that code or 15618299-00 both bring you to this listing. Trim assemblies often carry a supplier code that ends in a colour suffix, which is why it looks longer than the OE number. Read it off the underside rather than the visible face. If what you find matches neither reference, send the code through the quote route with your vehicle details and we will check it before you order.

Delivery time is confirmed with your quote. Because this is a bulky trim assembly rather than a small part, leave the interior stripping until it has landed and you have looked it over. Anyone working to a booked date should raise it on the quote route first, quoting OE 15618299-00, and we will tell you where this one currently stands.

This puts it on an oversized delivery service rather than travelling through an ordinary parcel round. The packaging details are shown on this page. Make sure someone will be available to receive it when it turns up, and have somewhere clean and flat ready indoors so you can lay it down carefully. Look the carton over as soon as it arrives, and keep it intact right through until the console is actually fitted in the car.

Plastic is what it is made from, matching the BYD original. On an assembly this size the material matters mainly in how you treat it. Carry it flat, keep tools off the finished faces, and expect the fixings to be clips as much as screws, so ease rather than pull. Nothing beyond the material is given, so no resin type or surface hardness is claimed on this page. If your trimmer needs more detail than that, ask through the quote route and we will go back to the source.

It is supplied in Sand Gold Beige, so it is intended to go in without painting. That only helps if your own cabin is the same shade, and a light interior colour shows a mismatch far more readily than black does. Hold it against your door cards and lower dash in daylight before fitting. If your car is trimmed in another colour, do not order this one on shape alone, since we offer no paint code for it and cannot advise on refinishing.

Inside the cabin, on the centre line between the front seats, which is why there is no side to it. This is the console body, meaning the main structure rather than the lids and inserts that hang off it. Plan on removing surrounding trim to get at the fixings, and keep the old assembly to hand until the new one is in, since it is the best reference you have. Confirm the fitment table on this page before any of it comes apart.

Only the Original/Genuine line from BYD is listed for this OE number, and no Aftermarket price sits behind it. A coloured console for a single model is about the least likely thing for the trade to copy, so a second tier would be an empty promise on the page. The price shown on this page is the one option. If you want us to look for another route to it, send 15618299-00 through the quote route with a photograph of the old console and we will tell you what exists.