Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | 2nd-Gen Qin PLUS DM-i Smart Driving | 2024 | All versions |
| BYD | 2nd-Gen Qin PLUS DM-i Smart Driving | 2025 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Centre Console Rear Mounting Bracket for BYD Qin PLUS DM-i, OE 14897939-00
Price shown without any local sales tax. Shipping is shown on this page and confirmed at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Rear mounting bracket for the centre console, OE 14897939-00 (HA5H-5305030), made for the BYD 2nd-Gen Qin PLUS DM-i Smart Driving 2024-2025. The black-coated pressed steel console bracket bolts to the floor and locates the rear of the console tray, taking load from the armrest and cup-holder section. It carries captive nuts on the top face and flanged feet at each end for the floor bolts. Fit this console support bracket when the original is bent or corroded and the console sits loose over the tunnel.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Plastic |
| Mounting position | Interior, Rear |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 14897939-00 · HA5H-5305030 |
| Approx. weight (packed) | Under 1 kg |
| Approx. packaging dimensions | 29 x 18 x 13 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Shipping to Hong Kong SAR is shown above and confirmed at checkout.
Frequently Asked Questions: OE 14897939-00
Why does this fit only one model, and what if mine is close to it?
The fitment table on this page shows one model, the BYD Qin PLUS DM-i, and only that model appears there. That is narrow by design, and it means a car outside the table has not been matched to this bracket. If your car is another BYD model, or a Qin PLUS build you cannot see in the table, do not order on the assumption that the console is shared. Send a photograph of the old bracket and its label through the quote route with OE 14897939-00 and we will confirm what fits your car.
My old bracket carries a different number. What should I do?
This bracket carries two references. Ours is OE 14897939-00, and the same item is also known as HA5H-5305030. Either number identifies it, so a marking reading HA5H-5305030 on the bracket you have unclipped is not a different component. It is a plastic part, so any marking will be moulded or printed into the surface. Clean it and read it in good light before you decide. If the number you find is neither of these, send a photograph of it through the quote route and we will tell you what your car takes.
How long before this bracket reaches me?
Allow 8 to 25 days for delivery, counted from your order to your door. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old centre console rear mounting bracket against OE 14897939-00. If anything about the timing matters for a booked repair, ask through the quote route on this page.
What is this bracket made of?
This bracket is made of plastic. It sits inside the cabin as a rear mounting bracket for the centre console, so once the console is back together it is out of sight and the finish of the moulding is not something you need to match to anything. Keep it safe until the trim work is booked in.
Where on the car does this bracket sit?
This one sits inside the car rather than under it. It mounts at the rear of the centre console, which is the section of console nearest the back seats. Getting to it means taking off console trim rather than jacking the car up. Work out how far the trim has to come apart before you order, because the bracket itself is only part of the job. If you are not sure the bracket you can see is the one described here, send a photograph of it through the quote route.
Why is there only one version of this bracket?
This bracket is offered in the Original/Genuine tier only, from BYD, so there is one version on the page rather than a choice of two. An Aftermarket line appears when a matching part from another manufacturer exists for this OE number, and none exists for 14897939-00. If you have found a non-genuine equivalent elsewhere and want it checked, send the number through the quote route and we will look at it.
Related Parts
How Ordering Works
Your order is packed and shipped tracked, and the import duty and VAT that apply to your destination are calculated at checkout. The final gallery image on this page is the process card showing each delivery step. Delivery to Hong Kong SAR: 8 to 25 days, depending on the option you choose at checkout. Shipping to Hong Kong SAR: from $6.85 (Economy), from $12.70 (Express), confirmed at checkout before you pay.