Front Door Shell (Left) for BYD Yuan UP, OE 15691902-00

This is the left-hand front door shell. OE 15691902-00 identifies the left side, which on a right-hand drive car is the front passenger door. Work it out from the driver's seat facing forwards rather than from outside the car. If the damaged door is the one the driver uses on a UK car, this is not the part you want, and the right-hand shell is sold separately. The fitment table on this page shows which vehicles this side fits, so check your model there before ordering.

The fitment record for this shell names a single model, the BYD Yuan UP. Door apertures are specific to the body, and a shell from a different model will not sit right on the hinges or close against the seal even where the outward shape looks similar. So we list it where the data supports it and nowhere else. If your car is a variant you think should be included, do not order and hope. Send a photograph of the old door and its label through the quote route, and we will check it against the OE number.

That is not a problem by itself. This shell carries OE 15691902-00 with SC3E-6101010/70 as the alternative reference, and both describe the same door. Different suppliers print different references, so paperwork from a previous repair may show either. Compare any label on the door you are removing with both numbers here. If yours is a third number we do not show, send a photograph of the old part and its label through the quote route before ordering, and we will confirm it against the OE number. A door shell is heavy and bulky, so it is worth settling the question before anything moves.

Delivery time is confirmed with your quote. Because the shell still needs preparation before it goes on the car, add your own painter's time to the total when you plan the job. If you have a booked slot in a bodyshop, speak to us through the quote route before ordering rather than after. The shipping cost is confirmed with your quote.

The packaging details are shown on this page. Make sure there is clear access at the delivery address before it arrives, since this does not travel as a small parcel. Inspect the packaging on all sides before you sign anything, and open it the same day so any transit damage is found early. Keep the packaging until the door has been checked against the old one.

The material of this part is metal. That means the shell can be prepared and finished by any bodyshop with normal panel equipment, and that the fixings will behave as they do on the original door. It also means careless handling leaves dents that show badly on a flat door skin. Carry it by the edges, keep it in its packaging until the day of the work, and look down the length of it in good light first.

For this shell we list the Original/Genuine part only, the BYD item held under OE 15691902-00. There is no Aftermarket entry against it, so the price shown on this page is for the one version and there is no second tier to set beside it. Large body panels are often supplied this way. If you would like us to look for another route to the same part, send a photograph of the old part and its label through the quote route, and we will tell you what we are able to find.