
Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2024 | All versions |
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2025 | All versions |
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2026 | All versions |
| BYD | Yuan PLUS | 2021 | All versions |
| BYD | Yuan PLUS | 2022 | All versions |
| BYD | Yuan PLUS | 2023 | All versions |
| BYD | Yuan PLUS | 2024 | All versions |
| BYD | Yuan PLUS Champion | 2023 | Type SC2E-10 |
| BYD | Yuan PLUS Champion | 2023 | Type SC2E-30 |
| BYD | Yuan PLUS Champion | 2023 | Type SC2ET-20 |
| BYD | Yuan PLUS Champion | 2023 | Type SC2EU-40 |
| BYD | Yuan PLUS Champion | 2024 | Type SC2E-10 |
| BYD | Yuan PLUS Champion | 2024 | Type SC2E-30 |
| BYD | Yuan PLUS Champion | 2024 | Type SC2ET-20 |
| BYD | Yuan PLUS Champion | 2024 | Type SC2EU-40 |
| BYD | Yuan PLUS Champion | 2025 | Type SC2E-10 |
| BYD | Yuan PLUS Champion | 2025 | Type SC2E-30 |
| BYD | Yuan PLUS Champion | 2025 | Type SC2ET-20 |
| BYD | Yuan PLUS Champion | 2025 | Type SC2EU-40 |
| BYD | Yuan PLUS Glory | 2023 | All versions |
| BYD | Yuan PLUS Glory | 2024 | All versions |
| BYD | Yuan PLUS Glory | 2025 | All versions |
22 vehicle versions. Scroll inside the box to see them all. Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Left Rear Steering Knuckle for BYD Yuan PLUS, OE 15561654-00
Price shown without any local sales tax. Shipping is shown on this page and confirmed at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Cast-metal left rear steering knuckle, also called a rear hub carrier or wheel upright, for the BYD Yuan PLUS under OE 15561654-00 and BYD number SC2E-2404101S. It locates the rear wheel bearing and ties the hub to the suspension arms and brake carrier, so a fresh casting restores correct hub geometry and alignment. Fits the 2nd-Gen Yuan PLUS Smart Driving 2024-2026, Yuan PLUS Glory 2023-2025 and Yuan PLUS Champion 2023-2025, plus the original Yuan PLUS 2021-2024. This is the left-hand casting. The right side uses OE 15561728-00.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Metal |
| Mounting position | Underbody, Rear Left |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 15561654-00 · SC2E-2404101S |
| Approx. weight (packed) | Under 4.5 kg |
| Approx. packaging dimensions | 27 x 21 x 16 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Shipping to Hong Kong SAR is shown above and confirmed at checkout.
Frequently Asked Questions: OE 15561654-00
Which side is this knuckle?
Left, at the rear. Sides are named from the driver's seat facing forward, so this one belongs on the rear left corner. A steering knuckle is machined for its own side and the right hand part is a separate listing, so it cannot be turned round to suit. Check the corner you are working on and, where the old casting is still legible, compare its marking with OE number 15561654-00. If you are replacing both rear corners, put the two references on the order rather than doubling this one.
What if my old knuckle carries a different number?
The casting mark and the catalogue reference are not always the same. If what you can read matches neither, stop before ordering, because the rear knuckles on this car are side specific and easy to mix up. Send the number, the side you are working on and the model year of the Yuan PLUS through the quote route on this page, and we will confirm it against the fitment table.
Should a garage fit this?
Yes. The knuckle is a safety critical suspension part, and it is catalogued with the wheel hubs and bearings, so a good deal of the corner comes apart and has to be set up again properly. That is a qualified fitter's job, working to the manufacturer's service data for the Yuan PLUS. Book the wheel alignment in at the same time rather than as an afterthought. The part itself shows what it is and where it sits, not the method, so the procedure has to come from the vehicle's own documentation.
How quickly can it be sent?
Delivery takes 8 to 25 days from your order to your door. The packaging details are shown on this page. If the car is already stripped and waiting, tell us through the quote route on this page and we will confirm the position. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old part against OE 15561654-00.
What is it made of?
Metal, which is what is given for this reference. We do not publish the casting alloy or any machining detail, and we will not guess at either. Where your workshop wants that level of detail before it accepts the part, send OE number 15561654-00 through the quote route on this page and we will take the question to the supplier.
Why only one version?
This reference is carried in the Original/Genuine line alone. The manufacturer behind it is BYD, and no Aftermarket knuckle has been matched to OE number 15561654-00, so there is no second tier to weigh up and the price shown on this page is the only one. If a matched alternative is listed later, both tiers will appear on this page together for comparison. Until then, if you would like us to search the market for this corner, send the OE number and the vehicle details through the quote route.
Related Parts






How Ordering Works
Your order is packed and shipped tracked, and the import duty and VAT that apply to your destination are calculated at checkout. The final gallery image on this page is the process card showing each delivery step. Delivery to Hong Kong SAR: 8 to 25 days, depending on the option you choose at checkout. Shipping to Hong Kong SAR: from $19.80 (Economy), from $26.70 (Express), confirmed at checkout before you pay.