Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Tai 3 | 2024 | All versions |
| BYD | Tai 3 | 2025 | All versions |
| BYD | Tai 3 | 2026 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Front Bumper Sub-Harness for Fangchengbao Tai 3, OE 15443727-00
Price shown without any local sales tax. Shipping is shown on this page and confirmed at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Front bumper sub-harness for the Fangchengbao Tai 3 (2024-2026), catalogued as OE 15443727-00 with reference UREC-4011300A. The loom routes power and signal to the front-end sensors and lamps behind the bumper, with a taped and sleeved plastic outer and moulded connectors at each branch. It mounts at the front of the car. Order this bumper wiring harness, also known as a sensor harness or front-end cable loom, to replace a chafed or corroded original.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Plastic |
| Mounting position | Exterior, Front |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 15443727-00 · UREC-4011300A |
| Approx. weight (packed) | Under 1.5 kg |
| Approx. packaging dimensions | 56 x 39 x 16 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Shipping to Hong Kong SAR is shown above and confirmed at checkout.
Frequently Asked Questions: OE 15443727-00
Is this front harness really limited to a single model?
Yes. One model is in the fitment data, the Fangchengbao Tai 3, and nothing else has been matched to it. Front sub-harnesses vary with the equipment fitted at the front of the car, so a near miss on model is not a near miss you can work with. Read the fitment table on this page first. Then check the OE number 15443727-00 against the harness you are removing, and if either of those leaves any doubt, use the quote route and send a photograph of the old part and its label so we can confirm against the OE number.
What if the reference on my old front harness is not the one shown here?
This listing answers to two strings. The OE number is 15443727-00 and the alternative reference for it is UREC-4011300A. Either of those on the old loom means you are in the right place. A third string is not one we offer and should not be treated as a match on the basis that it looks similar in shape. Write down exactly what is on the tag and send a photograph of it through the quote route on this page for a check against the OE number before you order.
How long before this front harness gets to me?
Allow 8 to 28 days for delivery, counted from your order to your door. If the car is off the road while the front end is apart, that is worth planning around, because the front bumper usually has to stay off until the loom is in. Ask on the quote route if the timing needs looking at for your own job. The shipping cost for your country is shown on this page and confirmed at checkout before you pay.
What material is this harness?
This harness is made of plastic, covering the sheathing and the connector housings on the loom. That covers what the loom is made from rather than how it is laid out. No grade or specification for the plastic is given, so nothing further about it is stated here.
Where is this harness located?
It sits at the front of the car, on the exterior side of the body, in line with its description as a front bumper sub-harness. No side is given for it, so there is no left or right version of this one to pick between. Use the fitment table on this page to confirm the car, and raise anything else through the quote route.
Why is only the genuine version offered?
Because no Aftermarket equivalent has been matched to this OE number. The genuine manufacturer is Fangchengbao, so the single tier on the page is the Original/Genuine harness and the price shown on this page belongs to it. This is a matching decision rather than a policy, and it is revisited as sourcing moves. Where an Aftermarket version is found, it is added as a second tier here. Ask on the quote route if you would like that looked at for your order now.
Related Parts
How Ordering Works
Your order is packed and shipped tracked, and the import duty and VAT that apply to your destination are calculated at checkout. The final gallery image on this page is the process card showing each delivery step. Delivery to Hong Kong SAR: 8 to 28 days, depending on the option you choose at checkout. Shipping to Hong Kong SAR: from $17.00 (Economy), from $32.75 (Express), confirmed at checkout before you pay.