Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Seal 05 DM-i | 2025 | All versions |
| BYD | Seal 05 DM-i | 2026 | All versions |
| BYD | Seal 05 DM-i Smart Driving | 2024 | All versions |
| BYD | Seal 05 DM-i Smart Driving | 2025 | All versions |
| BYD | Seal 05 DM-i Smart Driving | 2026 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Rear Bumper Sub-Harness for BYD Seal 05 DM-i, OE 14948613-00
Price shown without any local sales tax. Shipping is calculated at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Rear bumper sub-harness for the BYD 2026 Seal 05 DM-i (2025-2026) and Seal 05 DM-i Smart Driving (2024-2026). This branched wiring loom carries power and signal to the rear bumper parking sensors, reversing lamps and connectors, each colour-keyed for correct plug-in. It carries OE 14948613-00 (reference HA6HA-4013100A) and replaces a cut, melted or fault-throwing rear bumper wiring loom. Clips and routes behind the rear bumper cover.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Plastic |
| Colour | Black |
| Mounting position | Exterior, Rear |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 14948613-00 · HA6HA-4013100A |
| Approx. weight (packed) | Under 2 kg |
| Approx. packaging dimensions | 76 x 59 x 14 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Delivery to Hong Kong SAR is quoted with the part.
Frequently Asked Questions: OE 14948613-00
The loom I pulled out carries a different number. What now?
Check it against HA6HA-4013100A first. That reference sits alongside the OE number 14948613-00 for this harness, and a rear bumper sub-harness will often show only the alternative on its marking. A match on either number means you are in the right place. If the number you have read matches neither, do not order on a guess. Send us a photograph of the old harness and its marking through the quote route on this page and we will match it to the correct loom.
When would this sub-harness arrive?
Delivery time is confirmed with your quote. Rear bumper work usually means the bumper is already off the car, so if you are working to a booking, ask us to confirm the current position on this line before you strip anything down. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 14948613-00.
What material is this made from?
This loom is plastic, finished in black, covering the outer sheathing and connector housings. Grade and coating are not stated beyond that, so treat those two details as all that is given for the material. What matters more when it arrives is that the connector count and the branch lengths match what came off the car. Lay the old loom next to the new one on the bench and check that before you route it behind the bumper.
Whereabouts on the car does this loom sit?
This is an exterior mounted part at the rear of the car, which puts it behind the rear bumper rather than inside the cabin. That matters before you quote the job, because reaching it means removing bumper fixings rather than lifting a trim panel. No routing diagram is given for it, so work from how the old loom is clipped in and photograph the run before you pull it out. The fitment table on this page confirms which cars it belongs to.
Why is only one version offered here?
Because this line runs in the Original/Genuine tier alone. BYD is the genuine manufacturer and no aftermarket maker exists for 14948613-00, so there is no second version to price beside it. The loom is supplied new. If cost is the reason you were hoping for a choice, tell us through the quote route on this page and we will say whether anything comparable exists under another reference for the same rear bumper application.
Related Parts
How Ordering Works
Send the OE number and your address using the button above and we come back, within 24 hours and usually sooner, with one delivered price to Hong Kong SAR: the part, carriage on a route that takes it, and the import duty and VAT that apply where you are. Nothing is charged until you accept the quote.