Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Tai 3 | 2024 | All versions |
| BYD | Tai 3 | 2025 | All versions |
| BYD | Tai 3 | 2026 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Rear Bumper Wiring Harness for Fangchengbao Tai 3, OE 15443691-00
Price shown without any local sales tax. Shipping is shown on this page and confirmed at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Rear bumper sub-harness for the Fangchengbao Tai 3 (2024-2026), carried under OE 15443691-00 and interchange UREC-4013100A. This low-voltage loom links the rear parking sensors, reversing lamps and licence-plate lighting to the main body harness, with sealed connectors that match the factory rear fascia layout. The protective plastic conduit and pre-terminated plugs let it drop straight into the original routing. A direct replacement wiring harness and rear bumper cable set for a corroded or chafed original.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Plastic |
| Colour | Black |
| Mounting position | Exterior, Rear |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 15443691-00 · UREC-4013100A |
| Approx. weight (packed) | Under 1.5 kg |
| Approx. packaging dimensions | 59 x 47 x 16 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Shipping to Hong Kong SAR is shown above and confirmed at checkout.
Frequently Asked Questions: OE 15443691-00
Why does this harness fit one model only?
A sub-harness is built to the loom of the car it was drawn for, and the fitment table here names one model, the Fangchengbao Tai 3. No second model is shown for it. If your car is a different Fangchengbao, or a Tai 3 you are unsure of, the connectors are the thing that decides it and we cannot tell that from the fitment table. Compare the OE number 15443691-00 with the number on the harness you are pulling out, then send a photograph of the old part and its label through the quote route on this page.
The label on my old harness reads differently. Have I got the wrong page?
Probably not. This harness carries the OE number 15443691-00 and under the alternative reference UREC-4013100A, and either of those identifies it. Looms often carry a printed tag rather than a stamp, so look along the main branch and at the tape near the connectors before you decide what the number is. If the string you find is neither of ours, stop there. Send a photograph of it through the quote route on this page and we will match it to the OE number.
When would this harness reach me?
Allow 8 to 28 days for delivery, counted from your order to your door. The clock on both begins once the order is confirmed rather than when the page is loaded. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old part against OE 15443691-00. If anything about the timing matters for a booked repair, ask through the contact page.
What is this harness made of?
The material for this part is plastic, which is the sheathing and the connector bodies rather than the conductors inside. Plastic sheathing does not like being forced round a tight corner in the cold, so let the loom sit at room temperature before you route it.
Where does this harness run on the car?
This part sits at the rear of the car and on the exterior side of the body, which fits its description as a rear bumper sub-harness. It is not a cabin loom and it is not part of the main body harness. No side is given for it, so it is not a left or right item. Beyond that the routing is not described here. Read the fitment table on this page against your own car, and ask on the quote route if the position is still not clear.
Why is there no second version to choose from?
One tier only on this listing, and it is the Original/Genuine part from Fangchengbao. No Aftermarket harness has been matched to this OE number, so the price shown on this page is the only one there is. Sub-harnesses tend to be model specific, which narrows the field of anyone building an alternative. If that changes, a second tier goes on the same page. Until then, ask on the quote route if you want us to look at what else could serve.
Related Parts
How Ordering Works
Your order is packed and shipped tracked, and the import duty and VAT that apply to your destination are calculated at checkout. The final gallery image on this page is the process card showing each delivery step. Delivery to Hong Kong SAR: 8 to 28 days, depending on the option you choose at checkout. Shipping to Hong Kong SAR: from $17.00 (Economy), from $39.25 (Express), confirmed at checkout before you pay.