Rear Shock Absorber Assembly (Right) for BYD Song PLUS EV, OE 13005405-00

No, this one goes through a quote rather than straight checkout. Start by reading the fitment table on this page to confirm it lists your BYD Song PLUS EV, then use the quote route on this page rather than trying to add it to a basket. Once the details are in, you will get a proper answer back before anything is ordered. This keeps the right part matched to the right car before any money changes hands, so check the table first.

This is listed as the right rear shock absorber, and side matters here because the two are not interchangeable. The surest check is to look at the photographs on this page and compare the mounting points and orientation against the old unit still on the car. If you are at all unsure once you have looked, note the OE number 13005405-00 from the old part before ordering, since that confirms fitment beyond doubt.

Take a look at the old shock absorber before you order, since the OE number stamped on its body tells you exactly what was fitted to the car. Original or Genuine parts come from BYD and match that number directly. Aftermarket parts are made to fit the same application without carrying the maker's own branding. If you are not sure which tier your car needs, match the stamped number against the OE number 13005405-00 given on this page before choosing.

Do not fit it on the strength of memory alone. Pull out your registration document and match the model and model year printed there against the fitment table on this page before you order. Numbers get swapped or superseded over the years, so the table is the safer check than what you recall being fitted. If your model and year appear on the fitment table for this OE number, order with confidence. If you cannot find a match, use the quote route on this page rather than guessing.

Look at the right rear corner, where the shock sits between the body and the suspension arm, and check the fixings holding it in place. This is a rear, right hand, underbody assembly, so confirm its position against your own car before ordering. If the layout matches and the fixings look straightforward to you, proceed. If anything looks unfamiliar, check the fitment table on this page first.

It is a metal shock absorber assembly, and a full replacement unit for the right rear position, not a spring or bush kit on its own. Some listings and catalogues show this same part under the reference SA3EB-2915200 rather than the OE number above. If you are matching against a supplier list or an old invoice, check for that reference too before assuming there is no match, and confirm fitment against the table on this page.