Rear Shock Absorber Upper Support Pad for BYD e3 & Seagull, OE 11085251-00

This pad carries the OE number 11085251-00 and also the reference 3A-2915518. Its lower counterpart in the same set is numbered almost identically, so a quick glance at the last digits is not enough to tell the two apart. Take the reading from the old part in full. Where the marking has worn away, send a photograph of the old part and its label instead and let us do the matching from the fitment table. Both routes go through the quote form on this page, since this reference is handled by enquiry rather than from stock.

This one is safety critical. It belongs at the upper end of a rear shock absorber, so the work sits on suspension that carries the car, and it should be left to a workshop with a lift and the right supports. Have the rear of the car checked properly once it is reassembled. No fitting steps and no tightening values are given for this reference, so we print none. If a specification is needed, it should come from the vehicle manufacturer's data and not from a parts listing.

Delivery takes 8 to 25 days from your order to your door. Keep the old pad to hand when the new one arrives, since checking the two side by side before you open the packaging fully tells you straight away whether you have the right item. If the box looks damaged when it is handed over, note it before you accept it rather than after. For anything else, use the quote route on this page and we will pick it up from there.

It is made of rubber and it is black. Keep it out of sunlight and away from oil until it is fitted. How it travels is governed by the transport class on this page and not by its size. No expected service life is stated for it anywhere on this page, so do not plan the job around one.

This pad sits underbody, at the rear and at the upper end of the assembly. You will not see it from inside the car or with the bonnet open, since the car has to be raised and supported first. That is the extent of what we can tell you on position, and we will not describe a fixing we have not verified. Check the images on this page against the part on your own car before you send the enquiry, and include a photograph of what you have taken off if you are at all unsure.

The aftermarket tier is empty for this reference, so the enquiry you send concerns one version and no comparison is being withheld from you. If an alternative would suit you, say so in the enquiry and we will tell you whether we can place one. Use the quote route on this page with the OE number 11085251-00, or send a photograph of the old part, since this part is not sold from the basket.