Rear Subframe for Fangchengbao Bao 8, OE 15193402-00

Yes. This listing runs under OE number 15193402-00, and the same rear subframe also carries the reference TA90-2810004AE. Either number points at the item on this page, so if the label or stamp on the one you have taken off reads TA90-2810004AE, you are looking at the right listing. Clean the old part and read it in good light before ordering, because a subframe collects road dirt over the marking. If what you can read matches neither number, send a photograph of the old part and its label through the quote route on this page and we will confirm against the OE number.

This is a safety critical part, so it should go to a qualified workshop. It is catalogued under Suspension, in the subframe and crossmember group, which means it is a structural mounting rather than a bolt-on trim item. Work of that sort needs the car properly supported and the fasteners tightened to the vehicle maker's own figures, which we do not publish alongside the listing. Book the car in first, then order. Give the workshop OE number 15193402-00 so it can pull the correct fitting information for the Bao 8 before the car goes on the lift.

Delivery time is confirmed with your quote. Because this is a large underbody component going to a workshop booking, set the appointment against the far end of the stated window rather than the near end, and only confirm the date once the item is on its way. If your timing is tighter than that, ask through the quote route on this page before you order.

It travels as oversized freight, not as an ordinary parcel. The packaging details are shown on this page. Expect a larger delivery vehicle that needs room to pull up, and make sure the address you give can take it. Somebody has to be there to receive and sign for it. If the car is already at a garage waiting on the part, have it sent to the garage address rather than home.

This subframe is metal. A metal subframe will not flex into position, so the mounting points have to meet the body exactly as designed, which is another reason the fitting belongs with a workshop. Until the car is booked in, keep it dry and off a damp floor. No grade or alloy specification is given for this one. If your workshop needs that detail, ask us through the quote route on this page and we will put the question to the supplier.

At the rear, mounted to the underbody, so you will only get a proper look at it with the vehicle raised. The listing is catalogued under Suspension in the subframe and crossmember group, which places it among the structural parts under the floor rather than anything visible from outside. Before ordering, get the car on a lift or on axle stands and compare what is fitted against the images on this page and against OE number 15193402-00. The fitment table on this page shows the vehicles it covers, and the model in the title is the Bao 8.

Because only the Original/Genuine part exists under this OE number. The genuine manufacturer for it is BYD, and the price shown on this page is for that part. No Aftermarket equivalent exists for 15193402-00, so there is no second tier to weigh up on this listing and nothing further to choose. If you would rather we went looking for an alternative reference for your Bao 8, use the quote route on this page with the OE number from the old part, and we will come back with whatever the supply side can offer.