Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Sealion 06 EV | 2024 | All versions |
| BYD | Sealion 06 EV | 2025 | All versions |
| BYD | Sealion 06 EV | 2026 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Rear Subframe Splash Shield for BYD Sealion 06 EV, OE 14394280-00
Price shown without any local sales tax. Shipping is calculated at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Rear subframe splash shield for the BYD Sealion 06 EV (2024-2026), a molded black plastic underbody panel bolting beneath the rear subframe. Carrying OE 14394280-00 and supplier number UGE-3102370, this under-tray deflects road spray, grit, and water away from the rear suspension and floor. The pressed ribs and bolt bosses match the original mounting points so the splash guard sits flush against the underbody. Replace a torn or missing shield to restore underbody protection and airflow.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Plastic |
| Mounting position | Underbody, Rear |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 14394280-00 · UGE-3102370 |
| Approx. weight (packed) | Under 5 kg |
| Approx. packaging dimensions | 115 x 64 x 17 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Delivery to Hong Kong SAR is quoted with the part.
Frequently Asked Questions: OE 14394280-00
Will this fit my BYD Sealion 06 EV?
This shield fits the BYD Sealion 06 EV, with no other model shown alongside this OE number. Before you order, get the old shield off the car and out in front of you, so you can check the shape, the mounting points and how it sits against the subframe. A close resemblance from memory is not enough, since underbody shields can look alike while differing in the fixing pattern. Match it against the part in your hands, not against the model name alone, then place the order with confidence.
The number on my old part is different, what do I do?
If the number stamped or moulded on your old shield does not read 14394280-00, do not fit this one on the strength of the model name alone. This shield is also listed as UGE-3102370, so check for that reference too before assuming there is no match at all. Use the quote route on this page and give whichever number you have found, along with the model and model year of your car. That lets the difference get checked properly rather than guessed at, instead of being fitted on trust and found to be wrong once it is in place.
How is a part this size delivered to me?
Delivery time is confirmed with your quote. It is made of plastic, and the packaging details are shown on this page. Before ordering, note the model and the model year as shown on your registration document, then check the fitment table on this page. The shipping cost is confirmed with your quote.
What is this splash shield made of?
Plastic is the only material listed for this shield. It is easy enough to check over by hand before it goes anywhere near the car. Look at the photographs on this page for the shape of the fixing points and the lip round the edge, then hold your old shield up against that image before ordering. A close match there, not just on model name, is what tells you it is the right one for your car.
Where does the rear subframe splash shield fit on the car?
This shield sits underneath the car, fitted to the rear subframe as part of the underbody protection. It is listed under OE number 14394280-00, also shown as UGE-3102370. Before ordering, look underneath your own car at the rear subframe and note the side, the position and the fixings holding the existing shield in place, then match these against the fitment table on this page. Delivery time is confirmed with your quote.
Related Parts
How Ordering Works
Send the OE number and your address using the button above and we come back, within 24 hours and usually sooner, with one delivered price to Hong Kong SAR: the part, carriage on a route that takes it, and the import duty and VAT that apply where you are. Nothing is charged until you accept the quote.