Right Rear Strut Top Mount for BYD Seagull & e3, OE 11085221-00

This is the right side, so it is the passenger side part on a right hand drive car and the driver's side part on a left hand drive one. Sides here are always taken from the driving position looking forward. The mount sits at the rear of the car, at the upper end of the strut. Stand behind the car, work out which side you are facing, then reverse it. Do that before you order rather than after the box arrives, and if you are still unsure, ask through the quote route and send a photograph of the old part and its label.

Alongside the OE number 11085221-00, this one carries the reference 3A-2915600. Numbers in this family run close together, and the left hand mount sits only a digit away, so read the full string off the old part instead of trusting a partial match. A supplier invoice quoting the alternative reference is describing this same item. If the old part is too corroded to read, or the number you find matches neither, check the OE number on the old part or send a photograph through the quote route on this page and we will confirm the correct side from the fitment table.

This one is safety critical. It carries the top of a rear strut, so the assembly has to come apart and go back together under spring load, and that is not work to attempt with hand tools on a driveway. Use a workshop with the right equipment, and ask them to check the car over once it is back on its wheels. We publish no fitting sequence and no tightening figures for it, because none are available to us and we will not copy them in from elsewhere.

The delivery time is 8 to 25 days, from order to door. If the left hand mount is going on at the same time, order the two references together so they travel on the same window. If you want the current position on this reference before you order, ask through the quote route on this page. The shipping cost for your country is shown on this page and confirmed at checkout before you pay.

The material is rubber and the colour is black. Rubber means the part is meant to flex in service, which is why it should not be trimmed or packed out to make it fit. If it does not sit as it should, that points at the wrong reference rather than a part that needs persuading. Ask us through the quote route.

Only the Original/Genuine line exists for this one, with BYD as the genuine manufacturer. Nothing has been sourced on the aftermarket side for this reference, so the page shows a single option and the price shown on this page is that option. We list a second tier only where we have actually placed the part, and for this mount we have not. If you would rather we went looking, check the OE number on the old part or send a photograph through the quote route on this page and we will tell you what comes back.