Front Fender (Left) for BYD Yuan UP, OE 15691899-00

This is the left-hand fender, and OE 15691899-00 covers that side only. Sides are named as you sit in the car looking forwards, so the left fender is the one on the kerb side of a right-hand drive car. The old panel is the safest guide. Look for a moulded or stamped mark on the inner face, or compare the shape of the wheel arch cut against the images on this page. If you need the opposite side, the right-hand fender is listed separately under its own OE number.

This panel fits a single model, the BYD Yuan UP, and it is not offered for anything else. Body pressings change with the shape of the car, and a fender that looks similar on another model will usually differ at the arch line or the mounting holes. If your car is close but not the same, do not order on the strength of a picture. Check the OE number on the old panel, or send a photograph of it and its label through the quote route, and we will confirm it against this part before anything is picked.

Both tiers are priced on this page. The Original/Genuine fender is the BYD part sold under OE 15691899-00. The Aftermarket fender is an equivalent panel made for the same fitment but not carrying the vehicle maker's brand. Both are supplied new. Insurers and franchised repairs often specify the Original/Genuine panel, so check any repair paperwork before choosing. For an older car being kept on the road at sensible cost, the Aftermarket panel is the one most buyers take. Both options sit on this page, so you can move between them before ordering.

Probably yes. The two references describe the same panel, and which one appears on a label depends on who supplied it. Read the sticker or the stamping on the panel you are taking off and compare it with both numbers before you decide. If it matches neither, photograph the label and send it to us through the quote route. We would rather identify it for you than have the wrong panel travel.

Delivery time is confirmed with your quote. If a date is critical, tell us the date through the quote route ahead of ordering so we can say whether it is realistic for this fender. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 15691899-00.

The packaging details are shown on this page. It travels as an oversized item rather than an ordinary parcel, so make sure the delivery address can take a long box and that somebody is there to receive it. Check the corners and edges of the packaging while the driver is still with you, then open it before the repair is booked in.

This part is made of metal, which is what a bodyshop expects for a bolt-on wing. It can be worked and prepared using normal panel methods, and the fixings behave as they do on the original. Metal also dents, so keep it in its packaging until the moment it is needed and lift it by the edges rather than the face. Look along the panel in raking light when it arrives. If you find a mark from transit, tell us before any preparation work starts.