Front Bumper Bracket (Left) for BYD Yuan PLUS, OE 15183019-00

This is the left hand front bumper bracket. Sides are given from the driver's seat looking forward, so the left bracket is on the same side as the left front wing. The right hand bracket is a separate listing with its own OE number, and one is not the other turned over. If the front of the car has taken a knock, look at the bracket on each side before you order, since the right hand one would need adding to the order as a second line rather than assumed to be included.

Both tiers are offered under OE 15183019-00 and both are priced on this page. The Original/Genuine bracket is the BYD part. The Aftermarket bracket is another maker's version of the same bracket, built to the same fixing points. Since both carry the same OE number and the same fitment list, what differs is who made it and what it costs rather than what bolts to the car. Take whichever suits the repair, and use the fitment table on this page to confirm the vehicle either way.

Different numbers are normal here. Beside OE 15183019-00 this bracket also carries the reference SC2EV-2803310. A bracket that has come off a car may carry either, often stamped into the metal rather than printed, so clean the surface and read it under a good light. If your number matches one of the two, you are in the right place. If it matches neither, send it through the quote route on this page rather than ordering on the strength of the model name alone.

The delivery time is 8 to 25 days, from order to door. If the bumper is already off and the car is unusable meanwhile, the total span is the number that matters to you. The shipping cost for your country is shown at checkout before you pay. Before you order, check the OE number on your old part against the one on this page.

Metal, and it is a small formed bracket rather than anything bulky. Because it is metal, a bracket that has taken an impact often bends instead of breaking cleanly, which makes it easy to refit something distorted without noticing. Lay the new bracket over the old one on a flat surface and look along both before you fit. If the old part is twisted, the bumper cover will not sit right even with everything bolted up.

Black is the finish it comes in and there is no paint code with it. The bracket is mounted on the exterior side of the car, so if any of it stays in view once the bumper is refitted, black is what will be seen. Nothing arrives matched to your body colour. Put it alongside the old bracket before fitting and judge the finish against what came off. If it does need to match painted bodywork where you can see it, that is work for a paint shop beforehand.