Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Tang L DM | 2024 | All versions |
| BYD | Tang L DM | 2025 | All versions |
| BYD | Tang L DM | 2026 | All versions |
| BYD | Tang L EV | 2024 | All versions |
| BYD | Tang L EV | 2025 | All versions |
| BYD | Tang L EV | 2026 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Front Bumper Reinforcement Beam for BYD Tang L, OE 18296230-00
Price shown without any local sales tax. Shipping is calculated at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Front bumper reinforcement beam assembly for the BYD Tang L EV and Tang L DM 2024-2026, OE 18296230-00 (reference SRHA-8400010/70). The steel crash beam sits behind the front bumper cover, with boxed crush cans and bolt-on mounting plates at each end to tie into the chassis rails. Supplied in primer as the complete front impact bar. This bumper reinforcement bar manages front collision loads and is a structural fitment.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Metal |
| Mounting position | Exterior, Front |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 18296230-00 · SRHA-8400010/70 |
| Approx. weight (packed) | Under 12.5 kg |
| Approx. packaging dimensions | 157 x 35 x 32 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Delivery to Hong Kong SAR is quoted with the part.
Frequently Asked Questions: OE 18296230-00
My old beam has a different number stamped on it, what now?
Check the metal itself before you order. Underneath any dirt or grime there should be a number stamped or on a small plate on the part you are removing. Compare that stamped number with the OE number on this page, 18296230-00, rather than relying on memory or a workshop invoice. If it matches, this beam is the correct one. If you cannot find a stamped number or it is worn away, use the quote route on this page and we will confirm fitment for you.
How does a part this size get delivered to me?
This reinforcement beam is delivered as a parcel, with the packaging details shown on this page. Delivery time is confirmed with your quote. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 18296230-00. If anything about the timing matters for a booked repair, ask through the quote route on this page.
What is the front bumper reinforcement beam made of?
It is metal, listed under OE number 18296230-00. Being a metal part, it is fitted as a whole piece rather than trimmed or reshaped to fit. Before ordering, look at the beam currently on your car and check which side it sits on, how it is positioned across the front, and where it fixes on, then match those points against the fitment table on this page. If your old beam has the same OE number stamped or printed on it, that is the surest check you can make.
How do I make sure this is the right beam before I order it?
Keep the old beam in front of you before you order, and match its OE number against 18296230-00, which is also listed as SRHA-8400010/70. This is a metal part fitted to the front of the car and listed as new, made by BYD. Checking the number on the part you are removing is the surest way to confirm it matches before you commit to the order.
Related Parts
How Ordering Works
Send the OE number and your address using the button above and we come back, within 24 hours and usually sooner, with one delivered price to Hong Kong SAR: the part, carriage on a route that takes it, and the import duty and VAT that apply where you are. Nothing is charged until you accept the quote.