Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2024 | All versions |
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2025 | All versions |
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2026 | All versions |
| BYD | Yuan PLUS | 2021 | All versions |
| BYD | Yuan PLUS | 2022 | All versions |
| BYD | Yuan PLUS | 2023 | All versions |
| BYD | Yuan PLUS | 2024 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Front Bumper Lower Trim Panel for BYD Yuan PLUS, OE 16068189-00
Price shown without any local sales tax. Shipping is calculated at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Front bumper lower trim panel for the BYD Yuan PLUS, fitting the 2nd-Gen Yuan PLUS Smart Driving (2024-2026) and the earlier Yuan PLUS (2021-2024), OE 16068189-00 and reference SC2EV-2803153. The long curved plastic moulding runs along the base of the front bumper as the lower valance, guiding airflow and protecting the fascia edge. Tabs and clip points along the back fix it to the bumper skin. Fit as the front bumper lower trim or lower fascia spoiler.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Aftermarket |
| Material | Plastic |
| Mounting position | Exterior, Front |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 16068189-00 · SC2EV-2803153 |
| Approx. weight (packed) | Under 2.5 kg |
| Approx. packaging dimensions | 109 x 26 x 17 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Delivery to Hong Kong SAR is quoted with the part.
Frequently Asked Questions: OE 16068189-00
You have selected Aftermarket, the aftermarket alternative to this part. Where an answer below names BYD as the maker or calls the part Original/Genuine, it describes the Original/Genuine version, not this one.
Why are two prices shown for this panel?
Because two tiers are offered against the one OE number, 16068189-00. The Original/Genuine tier is the panel as produced by BYD. The Aftermarket tier is an alternative supply of the same panel, priced beside it on this page. Both are supplied new and both fit the same vehicle, so the decision is about sourcing rather than about whether it goes on your car. Read the fitment table on this page and confirm the vehicle, then choose the tier that suits the repair you are doing.
What if the number on the panel I removed is different?
There are two references in play for this one. The OE number is 16068189-00 and the alternative is SC2EV-2803153. Panels get marked with either, so a difference from the title on its own tells you very little. Look on the inner face of the old panel, where the moulding number normally sits, and read it against both. Agreement with either means you have found the right page. Agreement with neither means it should be checked, so send the number through the quote route on this page and wait for that to come back.
What are the timings on this one?
Delivery time is confirmed with your quote. Should you need the timing pinned down more tightly than that, use the quote route on this page and give OE 16068189-00 so the reply applies to this line only. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 16068189-00.
How is a panel this big sent out?
As an oversized parcel. The packaging details are shown on this page. The length is the part that catches people out, so check the delivery address before you order. Make sure the address can accept a long box and that somebody is available to sign for it when it arrives. For a difficult or restricted address, ask about the delivery route through the quote option on this page before you place the order.
What is the panel made of?
Plastic. It is a plastic moulding rather than a metal panel. It will crack under a sharp knock instead of denting, so store it flat and keep it away from the rest of the repair until you are ready to fit it. The fitment table on this page shows what it belongs to.
Whereabouts on the car does this panel go?
On the outside of the car, at the front and low down. It sits front and lower with an exterior mounting, and it is not handed, since there is no left or right version of it. That is consistent with a panel spanning the width, and with the packing length shown on this page. Compare it with the one you have taken off before committing, and check your own vehicle against the fitment table on this page rather than going by the title alone.
Related Parts
How Ordering Works
Send the OE number and your address using the button above and we come back, within 24 hours and usually sooner, with one delivered price to Hong Kong SAR: the part, carriage on a route that takes it, and the import duty and VAT that apply where you are. Nothing is charged until you accept the quote.