Front Bumper Lower Cover for BYD Yuan UP, OE 15386010-00

Our fitment data holds a single model against this part, the BYD Yuan UP. A bumper moulding is cut for one body and one set of apertures, so a similar looking panel from a related car will not line up on the fixings. Check your own vehicle against the fitment table on this page before ordering. If your car is a different model, or a Yuan UP of a build that is not shown, send the OE number from the old panel through the quote route on this page and we will look for the right reference.

Both numbers belong to this part. Look at the back of the old panel, near a mounting tab, and clean the area first. A match on either number puts you in the right place. If neither appears, send a photograph of the marking with your car details through the quote route on this page so we can confirm the part.

Delivery time is confirmed with your quote. A body panel is worth having in hand before the car goes in, because bumper work ties up a ramp and paint time that has been booked in advance. Plan the job against the later of those two points. If you are working towards a fixed date, say so through the quote route on this page before you order, and we will tell you plainly whether it can be met.

The packaging details are shown on this page. It travels on an oversize lane, so expect a booked delivery to an address where a long carton can be taken in and laid flat rather than left at a door. Give us an address where somebody can receive it during working hours. Open the carton and look the panel over before the car is stripped for the job, so you know what you have while the vehicle is still usable.

It is a plastic moulding. Plastic of this kind flexes onto its clips, which is exactly why it cracks when it is forced while cold. Handle it by the edges and keep it flat and supported in storage. Do not lever at a tab that is refusing to release. The fitment table on this page confirms which car the panel belongs to before you commit to fitting it.

This panel is black, so what arrives is a black moulding rather than a panel finished in your car's paint code. On some cars the lower section of the front bumper is meant to stay black, and on others it is painted with the body. Compare the new panel against the one you are taking off and let that decide it. If the old one was painted, this needs preparing and spraying to your colour first, and the painter will want it well before the car goes in.

It is an exterior part at the front of the car, in the lower part of the bumper assembly close to the road. That position explains why these are damaged by kerbs and speed bumps rather than by anything mechanical going wrong. It fixes to the bumper structure and to points under the front of the vehicle. Nothing here gives the fixing detail, so work from the manual for the Yuan UP, and use the fitment table on this page to be sure of the reference.

For this cover we list the Original/Genuine part alone, made by BYD. No Aftermarket version is given for the reference, so what you see on this page is the genuine moulding and nothing else. Panels for newer models frequently have no second tier available at all. If you want us to check whether anything else can be sourced for the Yuan UP, use the quote route on this page with your car details and the OE number, and we will come back to you with what we actually find.