Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2024 | All versions |
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2025 | All versions |
| BYD | 2nd-Gen Yuan PLUS Smart Driving | 2026 | All versions |
| BYD | Yuan PLUS | 2021 | All versions |
| BYD | Yuan PLUS | 2022 | All versions |
| BYD | Yuan PLUS | 2023 | All versions |
| BYD | Yuan PLUS | 2024 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Front Bumper Bracket (Right) for BYD Yuan PLUS, OE 15183022-00
Price shown without any local sales tax. Shipping is calculated at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Right front bumper bracket assembly for the BYD Yuan PLUS, matching OE 15183022-00 and SC2EV-2803410. This curved black plastic rail with three ribbed mounting bosses clips the front bumper cover to the body and keeps the leading edge aligned with the wing. It fits the 2nd-Gen Yuan PLUS Smart Driving 2024-2026 and Yuan PLUS 2021-2024. Fit a new bumper support when the tabs crack and the cover gaps at the corner. See OE 15183019-00 for the left-hand side.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Aftermarket |
| Material | Metal |
| Colour | Black |
| Mounting position | Exterior, Front Right |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 15183022-00 · SC2EV-2803410 |
| Approx. weight (packed) | Under 0.5 kg |
| Approx. packaging dimensions | 26 x 11 x 9 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Shipping is calculated exactly at checkout.
Frequently Asked Questions: OE 15183022-00
You have selected Aftermarket, the aftermarket alternative to this part. Where an answer below names BYD as the maker or calls the part Original/Genuine, it describes the Original/Genuine version, not this one.
Am I looking at the correct side here?
This is the bracket for the right hand side of the front bumper. Sides are named as though you are sitting in the car looking forward, which is worth checking before you order. The left hand bracket is listed separately under its own OE number, so make sure you are buying the side you actually need. If the old bracket is still on the car, work out which front wing it sits nearest and match that against the side named here. The fitment table on this page covers this right hand bracket.
Which of the two tiers should I buy?
This bracket is offered in two tiers, both priced on this page. Original/Genuine is the BYD part. Aftermarket is the same bracket made by another supplier to the same fixing points. Both sit under OE 15183022-00 with the same fitment list. Buyers putting a front end back to original specification tend to take the Original/Genuine tier, while a straightforward repair often does not call for it. Read the fitment table on this page first, then pick the tier, since the vehicle check applies to both equally.
What if the reference I have is not the one shown?
The reference on your old bracket may read SC2EV-2803410. That is the alternative number for this bracket, alongside OE 15183022-00, and both describe the same right hand front bracket. Metal parts usually carry the number stamped into a flat face, so degrease it and look again if nothing is obvious at first. If the number you find is neither of these, use the quote route on this page and send it through with your vehicle details rather than assuming it is the same bracket.
What is the delivery timing on this one?
Delivery takes 8 to 25 days from your order to your door. Read them as one total when you plan the repair, because a small bracket does not move any faster through the process than a large panel does. If the car is waiting on this single part, say so through the quote route on this page and ask what can be done before you place the order.
What is this bracket made of?
It is a metal bracket. Being metal, a bracket that has taken a hit tends to bend rather than break, which makes distortion easy to miss. Lay the new one over the old one on a flat surface and sight along both. Any twist in the old part is a sign that the panel or the fixing behind it wants checking as well before the bumper goes back on.
Is the finish on this bracket ready to fit?
The finish is black, with no paint code and no body colour match for it. It is an exterior mounted part, so decide whether any of it stays in sight once the bumper is back in place. If it does, compare it with the old bracket in daylight and make the call on the finish before assembly rather than afterwards. Nothing about this part arrives prepared for paint, so any colour work would need doing by a body shop before it is fitted to the car.
Related Parts
How Ordering Works
Your order is packed and shipped tracked, and the import duty and VAT that apply to your destination are calculated at checkout. The final gallery image on this page is the process card showing each delivery step. Delivery to Hong Kong SAR: 8 to 25 days, depending on the option you choose at checkout.