Front Bumper Upper Main Body for BYD Yuan UP, OE 14960279-00

Fitment for this bumper body comes back to a single model, the BYD Yuan UP, and nothing beyond it appears on this page. If your car carries the same name but a different year, or a related model from the same maker, treat it as outside this listing rather than close enough. A part this large is not one to guess at. Check your vehicle against the fitment table on this page, and if it is nearly right but absent from the table, put the model and year through the quote route first.

This bumper body carries the OE number 14960279-00 and also the reference SC3E-2803111A/30. Either identifies the same part. On a large moulding the number is usually on the inner face, sometimes near an edge, so look inside the old bumper rather than on the painted side. If what you find matches neither reference, stop before ordering something this size and use the quote route instead, giving us the number as it reads together with the model and year.

Delivery time is confirmed with your quote. With a package of this size there is no faster route, and there is little point ordering before you are ready to receive it, since it needs storing somewhere flat and clean. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 14960279-00.

The packaging details are shown on this page. Delivery needs an address where a package this size can be taken off a vehicle and carried inside, and it needs someone there to receive it, since a piece this size is not simply left at the door. Kerbside access matters here, so think about how it gets from the road to where it will be stored before the driver arrives. Unwrap it flat and check every edge and corner before it is stored.

This moulding is plastic. For a moulding of this length, handle it with care, since it can flex if you pick it up at one end. Carry it with a second pair of hands and support it in the middle. Store it flat rather than on edge, because a large panel left leaning can distort. Offer it up to the car before any fixing goes in and check the alignment along the whole span.

This part sits at the front of the car, in the upper position, mounted externally. It is the main upper body of the front bumper, so it is the large visible moulding rather than a bracket or a duct behind it. No side applies to it, because it is a single piece across the width of the car. The packaging dimensions on this page give a good sense of the span involved. Check the fitment table on the same page against your own vehicle before ordering something of this size.

This OE number is listed in one version only, the Original/Genuine bumper body from BYD. There is no Aftermarket manufacturer for this part, so no second tier appears and there is nothing on this page to compare. For parts held in both tiers we price both here and set out the difference. That is not the case for this one. Given the size of the part, confirm the OE number and the alternative reference against your old bumper before you order the version shown.