Front Licence Plate Mounting Base for BYD Yuan UP, OE 15388527-00

This base fits only one model, the BYD Yuan UP. A plate mounting base is shaped to a particular bumper face and screws into holes cast for it, so a part from another car will not sit flat even when the plate itself is the same size. Check the fitment table on this page against your own vehicle. If yours is a Yuan UP of a build that is not shown, or another model altogether, send a photograph of the old part and its label through the quote route and we will find the reference that belongs to it.

Turn the old base over and look at the back face for either marking. A match on either number means this is the correct listing for your car. If there is no marking at all, which happens often enough on small trim parts, send a photograph of the old part and its label through the quote route on this page and we will identify it from the OE number instead.

Allow 8 to 28 days for delivery, counted from your order to your door. This is a small item that travels on the standard parcel lane. Fitting is usually done on the drive with a screwdriver, so there is no workshop booking to plan around and you only need to be able to take in the parcel. If you are working towards a date, such as a test appointment or a hand over, mention it through the quote route on this page before you order.

The base is a plastic moulding. Plastic takes the fixing screws directly, so a mounting point is easy to strip by overtightening, and the base is easy to crack if the old one is pulled off with screws still in place. Take the fixings out first and work slowly. Keep the new part somewhere warm until it goes on, since cold plastic is less forgiving. The fitment table on this page confirms it belongs to your car before you begin.

This base is black, and it is supplied in that finish rather than in your car's paint code. The surround shows at the edges of the plate, so look carefully at the part you are taking off before you decide anything. On the Yuan UP this area is normally left as a black component. If the base on your car was painted to the body colour at some point in its life, the new one can be prepared and sprayed to match, and that is far easier done off the car.

It mounts on the exterior at the front of the car, on the bumper face where the front plate attaches. That is the first thing to meet a kerb or a post in a low speed knock, which is why these break more often than anything sitting behind them. There is no fixing detail given here for it, so check how the old one is held before you start pulling at it. The fitment table on this page confirms which vehicle this particular base belongs to.

This base is offered as Original/Genuine only, made by BYD, and there is no Aftermarket entry for this reference. That is why one price rather than two shows on this page. Small trim mouldings for a current model rarely have a second tier behind them. If you would like us to look for another source before you commit to the genuine part, send a photograph of the old part and its label through the quote route on this page, and we will tell you what is actually available for your car.