Front Subframe Splash Shield for BYD Qin PLUS, OE 13124892-00

Only one version is listed on this page, so there is no tier choice to make here. If you want to compare against another listing, this part also appears under the reference HA2EJ-3102310H, and searching that alongside OE number 13124892-00 will show you what else is sold for the same fitment. Order using the OE number on this page to make sure you get the correct one for your Qin PLUS, and keep the alternate reference noted in case a supplier asks for it instead.

Look at the shield you are removing and find the number stamped or moulded into the plastic itself, not a fitment guess from memory. Compare that figure directly against the OE number listed here, 13124892-00. If the two do not match, do not fit this part, since even a similar looking shield can be for a different build. Check the fitment table on this page against your vehicle details as well. If you are still unsure after checking both, use the quote route on this page and give the number you found so it can be confirmed properly.

Delivery time is confirmed with your quote. Because it sits under the front subframe, do not book the car in until the part is actually in your hands. Before ordering, check the OE number on the old shield against the fitment table on this page, so the part you are waiting for is the right one.

Delivery time is confirmed with your quote. Before it arrives, check the model and model year shown on your registration document against the fitment table on this page, since the underbody area it covers differs across production runs. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 13124892-00.

This is a plastic shield, made to sit underbody at the front, so its job is to keep water, grit and road debris off the subframe rather than to take heavy impact. Being plastic, it will not rust, but it can crack if it is bent out of shape during fitting or catches on a kerb. Check the side, the exact position and the fixings needed on your own car before you order, since a shield made for the wrong side will not sit flush and the mounting points will not line up.

No, it will not, since it fits underneath the car out of sight and is supplied in plain black plastic. There is nothing here to paint or finish before fitting. If you are unsure whether this shield is the correct one for your Qin PLUS, or want to check it against your old part before ordering, use the quote route on this page and someone will confirm it for you.

It sits underneath, fitted to the front subframe, so you will not see it from the outside without getting down or putting the car on a ramp. It is a black plastic shield, made new, fitted to the underbody area at the front. If you want to see exactly how it sits and how it is shaped before you order, have a look at the photographs on this page, which show the part on its own and give you a clear view of its form.