Grille Upper Cover Panel for BYD Tang L EV, OE 15019708-00

The fitment data on this record covers a single model, which is what you get with a panel drawn around one front end design. It is not a universal panel. If your car is a close relative of the one listed, that on its own is not enough, because a change in the grille layout across a range will change the panel with it. Read the fitment table on this page against your own vehicle, and if yours is not on it, use the quote route rather than ordering and hoping.

Look for SREA-5302210 as well as 15019708-00. That alternative reference also belongs to this panel, so a marking showing it means you are looking at the right item. The marking is often on the reverse, where it is hidden once the panel is fitted, so the panel has to come off before you can read it. If neither number appears, do not work from appearance alone. Send what you have through the quote route on this page and it can be checked against the fitment table.

Delivery time is confirmed with your quote. A bodyshop slot is worth booking against the later end rather than the earlier one. If you need a firmer position before committing, ask through the quote route on this page and quote 15019708-00 with your vehicle details. The shipping cost is confirmed with your quote.

It is a bulky item that arrives as an oversized carton rather than a standard box. That affects who can carry it and where it can be left at delivery. It is not something to have delivered with nobody at the address. The packaging details are shown on this page. Give a delivery point where a large flat carton can be taken in and stored without being leant against anything. Keep it packed until the car is ready for it.

Plastic, which is why the panel is light to lift but easy to flex out of shape while you are carrying it. Take it by two edges rather than one corner, and keep it flat while it waits. A split moulding is replaced rather than repaired, so if yours is cracked the panel on this page is the fix. Check the fitment table first.

The panel is supplied Black. Whether that is right depends on your car, since an upper grille panel may be black on one version and painted on another. Look at the one fitted now before you order. If yours is body coloured, the work has to be done after the part arrives, because it comes in the finish stated and nothing is painted at this end. It sits on the outside at the front of the car, so any difference in finish will be seen from a few metres away.

It mounts on the outside of the car at the front, in the upper position above the main grille, which is where the description on this page places it. Because it is an outer panel rather than something buried behind the bumper, you can look at the one on your car and compare it with this listing without taking anything apart. Do that first. Then check the fitment table for your own vehicle, and if the shape looks right but your model is missing, use the quote route on this page.

Only the Original/Genuine version exists for this panel, made by BYD, with no Aftermarket equivalent available. Where a panel is drawn for one front end, an alternative has to match closely to be worth listing, and until one has been checked against the same vehicles the page shows a single tier. If you have found something you believe matches, send the reference and the vehicle details through the quote route on this page and it can be compared against 15019708-00.