Rear Brake Line (Right) for BYD Seal 05 DM-i, OE 14890869-00

The right hand side at the rear. This pipe fits the right rear corner, and the side is stated as seen from inside the car facing forward. This is the second right rear hard line, so it is one of more than one pipe on that side and the OE numbers differ between them. Before ordering, follow the pipe you are replacing from end to end underneath the car, then confirm your model against the fitment table on this page rather than ordering from the title alone.

You have. Read the full string when you compare, since these references run to several blocks and a single character decides which pipe you get. If what you have does not match either, stop and ask. Send us the number and your vehicle details and we will check the fitment table on this page for you before an order goes anywhere.

This pipe is safety critical, and it belongs to the braking system at the rear right of the car. Fitting it means working under a raised car and opening the hydraulic circuit, with the brakes bled and tested before the car is used. That is workshop territory unless you are properly equipped. Order the pipe here and let a qualified mechanic do the labour. Ask them to look over the surrounding pipework on the same side while access is good.

Delivery time is confirmed with your quote. If the car is off the road waiting, order now rather than after the workshop has quoted you, because the wait starts when the order is placed. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 14890869-00.

By length rather than by weight. This line counts as an oversized item and will not go with a small parcel service, so make sure the delivery address can take a long package and that somebody is there to sign for it. If access at home is tight, consider a workshop address instead. The packaging details are shown on this page.

This line is made from metal. On a rear hard line that is the point of the part: it is a formed rigid pipe that keeps its shape along the underside of the car and does not flex in service. The consequence for you is that it arrives long and pre bent, and it cannot be reshaped to suit a different car. Take it out of the packaging carefully and lay it alongside the old pipe before you disturb anything, so you can see the bends line up.

Because it is the only version listed for 14890869-00. It is a BYD genuine part and no aftermarket line is offered alongside it, so one option shows at the price on this page. When both tiers exist for a part, the page shows the Original/Genuine and the Aftermarket together and the choice is yours. Here it is not. If you would like us to look for another source for this rear pipe, use the quote route on this page and give us the OE number with the vehicle details.