Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Yuan EV | 2018 | All versions |
| BYD | Yuan EV | 2019 | All versions |
| BYD | Yuan EV | 2020 | Luxury Y |
| BYD | Yuan EV | 2021 | Comfort Y |
| BYD | Yuan EV | 2021 | Luxury Y |
| BYD | Yuan EV | 2022 | Luxury Y |
| BYD | Yuan Pro | 2018 | All versions |
| BYD | Yuan Pro | 2019 | All versions |
| BYD | Yuan Pro | 2020 | All versions |
| BYD | Yuan Pro | 2021 | All versions |
| BYD | Yuan Pro | 2022 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
DC Charging Inlet Sub-Assembly for BYD Yuan Pro, OE 12763304-00
Price shown without any local sales tax. Shipping is shown on this page and confirmed at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
DC fast-charging vehicle inlet sub-assembly for the BYD Yuan Pro and Yuan EV 2018-2022, OE 12763304-00 with reference SCEG-2105500. The high-voltage lead set uses orange shielded cabling, a bracket-mounted routing clamp and a moulded charge-port connector, feeding the DC charge inlet at the vehicle exterior. Also called a DC charge port pigtail or HV charging inlet harness. Confirm the part by OE 12763304-00.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Plastic |
| Mounting position | Exterior |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 12763304-00 · SCEG-2105500 |
| Approx. weight (packed) | Under 1.5 kg |
| Approx. packaging dimensions | 55 x 20 x 18 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Shipping to Hong Kong SAR is shown above and confirmed at checkout.
Frequently Asked Questions: OE 12763304-00
The old inlet is labelled SCEG-2105500. Does that match this page?
It does. SCEG-2105500 and 12763304-00 are two references for the same DC charging vehicle inlet sub-assembly. On parts like this the number is usually printed on a label on the housing or on the loom rather than moulded into the plastic, and a label that has been outside for years does not always survive, so look at the back and under any tape before you decide it is blank. Matching either number here is enough. If yours shows something else, send a photograph through the quote route.
What is the timescale on this one?
The delivery time is 8 to 28 days, from order to door. If the car is going to a specialist and the slot is fixed, raise it through the quote route before you order rather than afterwards, and we will tell you what the current position is for your delivery address. The shipping cost for your country is shown on this page and confirmed at checkout before you pay.
Is the body of this inlet plastic?
Yes, this housing is made of plastic. That is worth knowing on the bench, because a plastic housing will not take being levered or clamped the way a metal one would. It also tells you what you are comparing against, since the item coming off your car should be a moulded housing of the same sort. If yours is not, read the number on it and check it against the two references shown on this page.
Whereabouts is this fitted on the vehicle?
This part sits on the exterior of the car, within the charge port and lid group, so you reach it from outside the body and not through the cabin. Expect the flap and the surrounding trim to come away before any fixings are visible, which is the part of the job people tend to underestimate. Since it sits outside, look at the condition of the old part and its mounting while everything is apart. Confirm your model in the fitment table on this page before you order.
Is there a cheaper version of this inlet available?
Not under this reference. Only the Original/Genuine version is listed, made by BYD, and no Aftermarket version is offered against 12763304-00, so there is a single option on the page rather than two. We show a second tier only where we offer a part we are confident answers to the same OE number. If someone has offered you an equivalent DC inlet and you want it checked, send the reference and a photograph through the quote route and we will compare it with this one.
Related Parts
How Ordering Works
Your order is packed and shipped tracked, and the import duty and VAT that apply to your destination are calculated at checkout. The final gallery image on this page is the process card showing each delivery step. Delivery to Hong Kong SAR: 8 to 28 days, depending on the option you choose at checkout. Shipping to Hong Kong SAR: from $17.00 (Economy), from $22.05 (Express), confirmed at checkout before you pay.