Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Sealion 06 EV | 2024 | All versions |
| BYD | Sealion 06 EV | 2025 | All versions |
| BYD | Sealion 06 EV | 2026 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Front Bumper Reinforcement Beam for BYD Sealion 06 EV, OE 19205569-00
Price shown without any local sales tax. Shipping is calculated at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Front bumper reinforcement beam assembly for the BYD Sealion 06 EV, listed under OE 19205569-00 with reference UGEA-8400010/70. This pressed steel impact bar bolts across the front of the chassis behind the bumper cover and includes the two integrated crash boxes that absorb low-speed collision energy. It suits the 2026 Sealion 06 EV and the Sealion 06 EV 2024-2026. Also known as a front crash bar or bumper rebar, it arrives in factory primer with the mounting plates ready to install.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Metal |
| Mounting position | Exterior, Front |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 19205569-00 · UGEA-8400010/70 |
| Approx. weight (packed) | Under 12.5 kg |
| Approx. packaging dimensions | 143 x 30 x 26 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Delivery to Hong Kong SAR is quoted with the part.
Frequently Asked Questions: OE 19205569-00
The number on my old part does not match 19205569-00, what now?
Do not fit it on the strength of a similar looking beam. Take the number stamped or printed on the part you are removing and check it against the fitment table on this page before you order. If your number does not appear there, this beam is not the one for your car. Matching numbers is the only way to be sure the new beam lines up with your mounting points and bolts straight in.
How does a beam this size actually get delivered to me?
Delivery time is confirmed with your quote. The packaging details are shown on this page. Because it is a bumper beam rather than a small bracket, the best way to see delivery cost and timing for your postcode before you commit is to run it through the quote route on this page. The shipping cost is confirmed with your quote.
What is the reinforcement beam made of?
This is a metal beam, not a plastic moulding, so it carries the weight of a real impact rather than just holding trim in shape. That is why it needs to match your car exactly rather than being close enough. Check the model and model year on your registration document before you order, since a mismatch here means a beam that will not sit right behind the bumper.
Where does this reinforcement beam actually fit on the car?
This is the structural beam behind the front bumper, and to be sure it matches your BYD Sealion 06 EV you need the number stamped on the old part you are removing. Find that number and set it against 19205569-00 or the alternative UGEA-8400010/70 shown here before you order. Metal parts like this can look near identical across model years, so matching the stamped number is the only way to be certain. Once confirmed, check the fitment table on this page for full details.
Related Parts
How Ordering Works
Send the OE number and your address using the button above and we come back, within 24 hours and usually sooner, with one delivered price to Hong Kong SAR: the part, carriage on a route that takes it, and the import duty and VAT that apply where you are. Nothing is charged until you accept the quote.