Front Bump Stop for BYD Seal 05 DM-i, OE 12657392-00

Use the fitment table on this page rather than the model name at the top. This bump stop fits a wide spread of BYD vehicles, and a shared model name does not always mean a shared part. Check your registration document for your model and model year, then find that entry in the table. Compare OE 12657392-00 or the alternative reference with whatever is marked on the item you have taken off the strut. If your car is not shown in the table, send a photograph of the old part and its label through the quote route and we will check it against the OE number.

It is. HAD-2905411 sits on this record as an alternative reference for OE 12657392-00, so a part marked that way and the part listed here are the same item. Which of the two numbers appears on a given piece depends on who supplied it, and neither carries more weight than the other. If the marking you can read matches either number you are in the right place. If it matches neither, quote what you can read to us through this page and we will check it for you.

Yes. This bump stop is safety critical and it belongs to the front strut assembly, so getting to it means taking suspension apart. That is workshop work with the right equipment, not a job for the roadside. No method or figures are published here, so please do not follow instructions written for some other vehicle. Give the garage the OE number when you book so they can check it against the item they remove before anything new is fitted.

Delivery takes 8 to 25 days from your order to your door. Once it arrives, hold it next to the bump stop you have taken off the strut and make sure the two match before you carry it out to the car. If anything looks wrong, use the quote route on this page to tell us before fitting. The shipping cost for your country is shown on this page and confirmed at checkout before you pay.

This bump stop is made from rubber, in beige. A rubber part should be kept out of direct sun and away from oils and solvents while it waits to be fitted, and it should not be stored under anything heavy that would squash it out of shape. The colour is beige, so if the piece you took off looked different, check the number rather than the appearance. Bring the old one to the garage so the two can be compared side by side.

It is an underbody item at the front, listed as a Front Shock Absorber Bump Stop, so it belongs on the front strut rather than anywhere at the rear. No side is given for it, so the same number applies to either front corner. It is out of sight with the wheels on the ground and only comes into view once the car is raised and the strut is out. Confirm what you removed came off the front of the car before you send the enquiry.

Because only the Original/Genuine tier exists for this OE number on our pages. The manufacturer for it is BYD and nothing is priced in the Aftermarket tier, so there is a single version rather than a pair to choose between. When an aftermarket equivalent is available we list it beside the genuine one so the difference is visible at a glance. Should you want an alternative traced for this number, say so in the quote request and send a photograph of the old part and its label so we can check it against the OE number.