Front Strut Top Mount for BYD Seal 05 & Qin PLUS, OE 12661684-00

Start with the fitment table on this page rather than the title. This upper mount assembly fits a number of BYD models, and two cars wearing the same name can take different suspension parts depending on build. Find your model in the table, then hold OE 12661684-00 against anything stamped or printed on the mount you are replacing. If the table does not show your car, or the old mount gives you a number that agrees with neither reference here, ask us through the quote route before you order.

Yes. HAD-2905700 is the alternative reference we offer for this upper mount assembly, and it sits on the same record as OE 12661684-00. Parts of this kind often leave the line marked with one reference and reach the buyer known by the other, which is why both are published here. Compare what you can read on the old mount against the pair given on this page. Should you find a reference that agrees with neither, send it to us through the quote route with your model details and we will look it up.

We treat it that way. This upper mount assembly is safety critical, and it is an underbody item at the front of the car, so the vehicle has to be raised and properly supported before the work can be reached at all. That is garage territory rather than driveway territory. Get the car booked in first, then order, and ask the garage to compare OE 12661684-00 with the old mount while it is off the car. Anything that does not look right is far cheaper to catch at that point.

Delivery takes 8 to 25 days from your order to your door. This mount is not something to leave until the last minute. If your timing is tight, raise it in the quote route first. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the OE number on your old part against the one on this page.

This upper mount assembly is made of metal and supplied new. Between them, that describes a fresh assembly rather than a used one taken off another car and tidied up. Keep the packaging sealed until the car is in the air, and let whoever is fitting it open the box and look the part over first.

This part sits at the front of the car, at the upper end of the strut, and the mounting is underbody. That combination is worth reading carefully when you are comparing parts, because upper and lower suspension parts are ordered under different numbers and a near miss here is an expensive one. Check the position against what you have taken off, and confirm the model in the fitment table on this page before committing to OE 12661684-00.

Because only one exists. BYD is the manufacturer of this upper mount assembly and there is no aftermarket equivalent for it, so the Original/Genuine item is the single version we can put in front of you. When a part does have both tiers available they are shown together on the one page and priced there for comparison. Here the question is simply whether the reference matches your car. If you want an alternative source looked into, ask through the quote route with OE 12661684-00.