Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Seagull | 2023 | Luxury Y (Blue-Orange Two-Tone Interior 19002) |
| BYD | Seagull | 2023 | Premium Y (Blue-Orange Two-Tone Interior 15463) |
| BYD | Seagull | 2024 | Luxury Y (Blue-Orange Two-Tone Interior 19002) |
| BYD | Seagull | 2024 | Luxury Y (Optional Direct-Cooling, Battery-Pack, Pink Interior 15482) |
| BYD | Seagull | 2024 | Premium Y (Blue-Orange Two-Tone Interior 15463) |
| BYD | Seagull | 2025 | Luxury Y (Blue-Orange Two-Tone Interior 19002) |
| BYD | Seagull | 2025 | Premium Y (Blue-Orange Two-Tone Interior 15463) |
| BYD | Seagull Glory | 2023 | All versions |
| BYD | Seagull Glory | 2024 | All versions |
| BYD | Seagull Glory | 2025 | All versions |
| BYD | Seagull Smart Driving | 2025 | All versions |
| BYD | Seagull Smart Driving | 2026 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Rear Bumper Front Bracket (Left) for BYD Seagull, OE 13607963-00
Price shown without any local sales tax. Shipping is calculated at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Rear Bumper Bracket (Left Front) for the BYD Seagull, including the Smart Driving (2025-2026), Glory and standard Seagull (2023-2025), OE 13607963-00 (reference EQEA-2804310). This moulded bracket anchors the front edge of the rear bumper cover on the left side, keeping the panel seam tight and rattle-free. Also listed as a bumper support or bumper retainer, it clips to the factory mounting tabs. This is the left-hand item. The right side takes its own bracket.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Aftermarket |
| Material | Plastic |
| Colour | Black |
| Mounting position | Exterior, Rear Left |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 13607963-00 · EQEA-2804310 |
| Approx. weight (packed) | Under 0.5 kg |
| Approx. packaging dimensions | 44 x 19 x 14 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Shipping is calculated exactly at checkout.
Frequently Asked Questions: OE 13607963-00
You have selected Aftermarket, the aftermarket alternative to this part. Where an answer below names BYD as the maker or calls the part Original/Genuine, it describes the Original/Genuine version, not this one.
Is this bracket for the left or right side of my car?
This one is listed as the left side, fitted at the front of the rear bumper. Before ordering, have the old bracket in your hand and note which side of the car it was removed from, since left and right are not the same part. Checking this against the bracket in front of you is the surest way to order the correct side first time.
What is the difference between Original and Aftermarket for this bracket?
This listing is for a new bracket in black plastic, made in China. To see exactly what you would receive and judge the finish for yourself, have a look at the photographs on this page before ordering. If you are matching an existing part, check the OE number 13607963-00 or the alternative reference EQEA-2804310 against the one fitted to your BYD Seagull, since that confirms fit better than reading a description alone.
The number on my old bracket does not match 13607963-00, what now?
Do not fit it on the strength of the number alone. Check the model and model year shown on your registration document against the fitment table on this page before you order. This bracket is listed for the BYD Seagull, left side, rear position, so confirm those details match your car first. If everything lines up there, it is safe to proceed. If in doubt, send a photograph of the old bracket and its label through the quote route on this page and it will be checked against the OE number for you.
What is this bracket made of and does that matter for fitting?
This bracket is plastic. Check the side, the rear position and the fixings against your own car before you order, since a bracket that does not match on all three points will not sit or fasten correctly. Use the fitment table on this page to confirm your car is listed, and match the OE number 13607963-00 against the marking on your old bracket if you are at all unsure. Getting the side and position right matters more here than with a simple trim piece, because a mismatched bracket will not line up with the bumper mounts.
Will I need to paint this bracket to match my car?
Black is the only finish listed for this bracket here. There is no bare or unfinished version described for this part, so there is no separate finishing step to consider. If you want to be certain you are matching the right item, check it against the alternative reference EQEA-2804310, which this same bracket is also listed under, and compare that against whatever reference you are working from. That comparison is the extra check available to you before you order.
How long does delivery take?
Delivery to Hong Kong SAR takes 8 to 25 days from your order to your door, depending on the option you choose at checkout. The shipping cost for your country is shown at checkout before you pay, and you can follow the parcel with tracking all the way.
Related Parts
How Ordering Works
Your order is packed and shipped tracked, and the import duty and VAT that apply to your destination are calculated at checkout. The final gallery image on this page is the process card showing each delivery step. Delivery to Hong Kong SAR: 8 to 25 days, depending on the option you choose at checkout.