Rear Bumper Fog Lamp Trim Panel (Left) for Fangchengbao Tai 3, OE 16335144-00

Left, and only left. The listing is for the left fog lamp trim panel in the rear bumper of the Tai 3, which on a right-hand drive car is the nearside as you look forward from the driver's seat. Sides are always given from inside the car facing forward, never from standing behind it. Read the marking on the panel you are removing. The one that belongs here is 16335144-00. If what you find is a different number, check the fitment table on this page before ordering.

This panel fits one model, the Fangchengbao Tai 3, and the fitment table on this page shows that single entry. We cannot tell you it suits anything else, and we will not imply that it does. If your car is a near relation, or a Tai 3 of a year that is missing from the table, the safe move is to read the number off your own panel and put it through the quote route. We will check it against the OE number before anything is ordered.

Check the second reference first. Along with the OE number, this panel also carries the reference UREC-2804105, and only one digit separates that from the code used on the opposite side, so read it carefully. The code you find on an old panel is often this second reference rather than the vehicle maker's number, and it will be on the inner face. Take the panel off, read what is stamped there and compare it with both references given on this page. Anything matching neither should go through the quote route.

The delivery time is 8 to 28 days, from order to door. Nothing about this item slows the carrier down, since it is small and light. Use the fitment table on this page to settle the year before you order, so the wait produces the panel you actually need. The shipping cost for your country is shown on this page and confirmed at checkout before you pay.

It is a plastic moulding. Beyond material and colour, nothing more is given about the grade of plastic or how the panel is fixed, and we will not invent either. Handle it by the edges and keep it wrapped until the bumper is off, because a moulding this thin picks up marks from a workshop floor in seconds.

This panel is black and it shows on the outside of the car, so the finish matters here. We cannot say whether that black is textured or gloss, only that it is black. Look at the photographs on this page and at the panel currently on your Tai 3. If yours has been painted to body colour, this one will need painting too, and that is a job for a bodyshop rather than a rattle can.

There is one version of this panel and it is the genuine Fangchengbao part. No aftermarket equivalent has been sourced against 16335144-00, so no second tier appears on the page and there is nothing to weigh up. On parts where both are available you would see an Original/Genuine option and an Aftermarket option together. Here the only decision left is whether this really is your panel, so read the fitment table on this page and the alternative reference UREC-2804105 before you order.