Rear Bumper Fog Lamp Trim Panel (Right) for Fangchengbao Tai 3, OE 16335143-00

This is the right-hand panel. It sits in the rear bumper of the Tai 3 as the right fog lamp trim panel, so it is the one on the offside as you sit in a right-hand drive car facing forward. The quickest check is the number on the panel you are taking off, which should read 16335143-00. If it reads anything else, look again at which side you are holding, then use the fitment table on this page before you order.

The fitment covers one model only, the Fangchengbao Tai 3, and this panel is made for that car and nothing else. Where a part is shared across a range, the fitment table on this page shows the whole range. Here it shows a single entry. If your car is close but not the same, or is a Tai 3 from a year that does not appear in the table, do not order on the strength of the shape looking right. Send the number from your own panel through the quote route instead.

Check the other code before you worry. This panel also carries the code UREC-2804106, and that is what an old panel often carries on it rather than the OE number 16335143-00. Trim mouldings are marked by whoever moulded them, and the marking usually sits on the hidden face where the clips are. Get the panel off, turn it over and read what is there, then match it against either reference shown on this page. If it matches neither of them, use the quote route.

The delivery time is 8 to 14 days, from order to door. A trim panel of this size travels as an ordinary parcel, so nothing unusual happens at the delivery end. Confirm the side and the year in the fitment table on this page before ordering, because a trim panel for the wrong side will not clip up. The shipping cost for your country is shown on this page and confirmed at checkout before you pay.

This panel is plastic. Plastic of this kind is easy to scuff before it ever reaches the car, so leave it wrapped until the bumper is ready for it. The fixings and the finish quality are not described beyond the material and the colour, and we will not fill that in for you. Compare the photographs on this page with the panel you are taking off before you order.

It comes in black and it is a visible part of the rear bumper, so the question is a fair one. Nothing here says the finish matches painted bodywork, and we make no claim either way. If the panel on your car has been sprayed to body colour at some point, this one will need the same treatment from a bodyshop before it goes on. If yours is textured black as it left the factory, compare the photographs on this page and order it as supplied.

Only the genuine Fangchengbao panel is available for OE number 16335143-00. There is no aftermarket equivalent sourced for this one, so the page carries a single option rather than the two tiers you will see elsewhere on the site. Where both exist, an Original/Genuine option and an Aftermarket option appear together and you pick. Since there is no choice to make here, spend the time on identification. The alternative code UREC-2804106 and the fitment table on this page will tell you whether this is your panel.