Verified Fitment
| Brand | Model | Year | Variant / type code |
|---|---|---|---|
| BYD | Sealion 06 EV | 2024 | All versions |
| BYD | Sealion 06 EV | 2025 | All versions |
| BYD | Sealion 06 EV | 2026 | All versions |
Type codes are printed on the vehicle identification plate. Not sure? Send us the number from the old part over WhatsApp and we confirm it against the factory catalogue before you order.
Rear Bumper Lower Main Body for BYD Sealion 06 EV, OE 16088668-00
Price shown without any local sales tax. Shipping is calculated at checkout. Import taxes and duty in Hong Kong SAR are not included and may be charged when the parcel arrives.
About This Part
Rear Bumper Lower Main Body in textured black plastic, supplied under OE 16088668-00 and reference UGE-2804112. This lower bumper cover forms the bottom rear valance with twin vent apertures and clip channels for the BYD Sealion 06 EV 2024-2026, including the 2026 Sealion 06 EV. Mounted at the rear exterior, it is the same rear diffuser panel and bumper skirt seen on the production car. Check the clip layout against your old lower fascia to confirm the match.
Technical Details
| Specification | Value |
|---|---|
| Condition | New |
| Quality line | Original/Genuine |
| Material | Plastic |
| Colour | Black |
| Mounting position | Exterior, Rear |
| Amount in delivery | 1 piece |
| Specification | Value |
|---|---|
| OE references | 16088668-00 · UGE-2804112 |
| Approx. weight (packed) | Under 8 kg |
| Approx. packaging dimensions | 163 x 48 x 33 cm |
| Country of origin | China |
| Vehicle type | Passenger Car |
Packaging dimensions and weight are approximate and for orientation only. Delivery to Hong Kong SAR is quoted with the part.
Frequently Asked Questions: OE 16088668-00
The moulding number on my old bumper section is not the one in the title. Is that a problem?
Not on its own. Look on the inner face of the section you have removed, where moulding marks usually sit, and read what is there against both. A match with either puts you on the right page. Without a match to either, do not order a panel of this size on a guess. Put the number through the quote route on this page and have it checked.
How long will this take to reach me?
Delivery time is confirmed with your quote. If the booking depends on a firmer date, use the quote route on this page and give OE 16088668-00 so the answer applies to this line. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 16088668-00.
How is a bumper section this large delivered?
As an oversized item rather than an ordinary parcel. Packaging details are shown on this page. Before ordering, make sure the delivery address has room to receive an oversized box and that somebody will be there to take it in. If the address is awkward, ask through the quote route on this page before you order, so that delivery can be arranged properly.
What is this section made from?
Plastic, and moulded rather than fabricated. A moulding will crack rather than dent if it is dropped or leaned against something hard, so keep it supported and off its edges until the car is ready for it. The fitment table on this page shows what it belongs to.
Will this need painting before it goes on?
It comes in black and the mounting is on the exterior, so it will be in plain view once the car is back together. Lower rear sections are often left black from the mould, in which case it fits as supplied. If the section you have taken off is finished in the body shade, the new one has to be prepared and sprayed to match before fitting, and that is bodyshop work to allow for. Use the old section as your guide. Black is the only finish this part comes in.
Where does this sit on the vehicle?
At the rear of the car, low down, and on the outside of the body. This section mounts to the rear and lower exterior of the body, and no side applies to it, which is consistent with a section running the full width rather than a handed pair. The packing length shown on this page points the same way. Compare it against the section you have taken off, and check your vehicle on the fitment table on this page before you order.
Why is there no second version of this to choose from?
Because no Aftermarket version exists for it. What is priced on this page is the Original/Genuine tier, the section as made by BYD. Large body mouldings tied to one model are often single source, and this is one of those. If an alternative supply would suit you better, send OE 16088668-00 through the quote route on this page together with your vehicle details and it can be looked into. Until an Aftermarket version is offered, the genuine section is what can be ordered here.
Related Parts
How Ordering Works
Send the OE number and your address using the button above and we come back, within 24 hours and usually sooner, with one delivered price to Hong Kong SAR: the part, carriage on a route that takes it, and the import duty and VAT that apply where you are. Nothing is charged until you accept the quote.