Rear Spoiler for BYD Sealion 06 EV, OE 15850374-00

The fitment table for this part lists a single model, the BYD Sealion 06 EV. That is the extent of what this listing covers, and we will not stretch it further. If your car wears the same badge but a different model or a different build, treat this listing as unconfirmed for you rather than close enough. The safe route is to read the reference off the old spoiler and compare it with the numbers on this page. If you cannot get at it, send a photograph of the old spoiler and its label through the quote route, and we will confirm it against the OE number.

Yes. This part is listed under OE 15850374-00 and is also known as UGE-6302001, so both numbers point at the same spoiler. Either can turn up on a parts invoice or on a sticker under the trailing edge of the old part. Check what you have against both. If the reference you are reading matches neither, do not order on the strength of the shape looking right. Send a photograph of the old part and its label through the quote route on this page, and we will confirm it against the OE number.

Delivery time is confirmed with your quote. A spoiler is often fitted alongside other bodywork, so if a shop is waiting on it, order early enough that the car is not standing idle. The shipping cost is confirmed with your quote. Before you order, check the number on your old part against OE 15850374-00.

Boxed, this spoiler travels as a long parcel. The packaging details are shown on this page. It goes onto an oversize service rather than a standard parcel round. Expect a delivery that needs signing for rather than one that is pushed through a door. Keep the box flat while it is in storage, because a long thin carton takes a bow if it is stood on end. Unwrap it and check the finish before the packaging is discarded.

The material is plastic. Moulded parts flex a little when they are offered up to the car, and that is ordinary handling rather than a fault. The surface is the thing to protect, so leave the wrapping on until the spoiler is about to be fitted. If it is going to a shop for painting, hand it over still wrapped so the preparation is done by the people spraying it. Check it over on arrival while the box is open.

This spoiler is supplied in black. Whether that is the finish you want depends on your own car. A car with black trim across the rear will often take it as it comes, while a body coloured rear end will need the part sprayed to match before it goes on. That is a job for a paint shop working from your car's own colour code, not from a photograph. Look at the trim you are replacing and decide before you order, because painting it is a step that cannot be undone.

This part mounts on the exterior at the rear of the BYD Sealion 06 EV. It is described as the rear spoiler sub-assembly, so it is the moulded section that sits across the back of the car rather than any bumper or trim below it. If the damage you are working around is lower down, this is not the listing you want. Confirm the model in the fitment table on this page first. Then compare OE 15850374-00 with the reference on the part you are taking off.

This spoiler comes in the Original/Genuine tier alone, under the BYD name. There is no Aftermarket version of this spoiler against OE 15850374-00, so the price shown on this page is the only one that applies to it. If a repairer has offered you a copy part instead, we would rather check the reference than have you fit something unverified. Use the quote route on this page with the number from the old spoiler, or send a photograph of it and its label, and we will tell you what can be sourced for your car.