Ball Pin Press-Fit Assembly for BYD F3, OE 10142998-00

The fitment table on this page covers a single model for this ball pin, the BYD F3, and nothing else. A car carrying a similar name or a similar year is not evidence of fit, and we will not stretch the fitment to cover one. If yours is a different BYD, read the OE number 10142998-00 or the alternative F3-2904140 from the joint you are removing and send that number with your vehicle details through the quote route. We will tell you plainly what fits.

Both tiers are priced on this page. The Original/Genuine version is the item from BYD, the maker of this OE number. The Aftermarket version answers the same fitment on the same table, and no maker is named for it on the page, so we will not pretend to tell you whose it is. Pick on what the job in front of you needs. Allow 8 to 25 days for delivery, counted from your order to your door.

Probably, if it reads F3-2904140. This part carries the OE number 10142998-00 as well as that alternative reference, and either can appear on the item taken off the car. Underbody parts collect road dirt, so clean the stamping before you read it. Where the number you have matches neither, stop and check rather than order. Send us what you can read, along with your vehicle details, through the quote route, and we will work back to the correct match rather than leave you with a joint that will not press home.

This part is safety critical, and it belongs to the steering of the car. That points firmly at a qualified mechanic working to the vehicle manufacturer's own procedure and figures, which we do not publish on this page and will not improvise. If you run your own workshop you will already hold that information. If you are buying the part to hand over to a garage, pass on the OE number 10142998-00 as well, so they can confirm the match against the fitment table before the car goes up on the ramp.

Delivery takes 8 to 25 days from your order to your door. If your booking depends on a firm date, ask us through the quote route before ordering. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old part against OE 10142998-00. If anything about the timing matters for a booked repair, ask through the quote route on this page.

The material is metal. For you that matters at the bench in one practical way. It is a press fit assembly, so it wants proper support rather than a hammer and hope. Compare the metal body against the joint you have taken off before you start, and check the OE number 10142998-00 on it while the old part is still in your hand.

This part is mounted underbody, and it is catalogued under steering, with tie rods and ball joints. In plain terms it lives beneath the car rather than in the cabin or under the bonnet, which means the car has to be raised safely before anyone can reach it. That also explains why the old one may be caked in road dirt when you find it. Match your car on the fitment table on this page first, then confirm the OE number 10142998-00 once the joint is visible.