Centre Exhaust Pipe for BYD Seal 05 & Qin PLUS DM-i, OE 14828218-00

It does. This pipe carries two references on one record, OE 14828218-00 and HA5HA-1203020, so a quote or an old part reading as the second one still lands here. Be careful with the last digits, because the rear section of the same system sits under a very similar reference and the two are not the same part. Compare the whole string before ordering rather than the leading block. If you have a number that matches neither, send it through the enquiry form with a photograph of the old part and its label.

Delivery time is confirmed with your quote. It is worth ordering every section you intend to change in one go, since a partly stripped exhaust is no use to anybody while it waits for the next delivery. If a date matters, put the question through the enquiry form before you commit. The shipping cost is confirmed with your quote.

This one travels as a long load and not as a standard parcel. The packaging details are shown on this page. The delivery point has to be somewhere a package of that length can be taken off a vehicle and carried in without being bent round a corner. Check both ends of the tube for crushing when it arrives. If the packing has been folded anywhere along its length, tell us before you open it.

The material this pipe is made from is metal. On a pipe of this length that means it will take a permanent set if it is leaned on or stood in a corner under its own weight, so keep it flat and in its packing until the old section is off the car. Nothing here goes beyond the material itself, so nothing here should be read as a fitting method. Sight along the full length for straightness before it goes anywhere near the ramp.

This section mounts underbody, so it runs beneath the floor of the car between the front and the rear of the system. The vehicle has to be raised to reach it, and the work goes more easily on a ramp than on stands. Nothing here describes the joints at either end, so the pipe that comes off is your pattern for the one going on. The fitment table on this page shows which BYD Seal 05 and Qin PLUS DM-i builds are matched.

Not for this pipe. Only the Original/Genuine version is listed, BYD is named as the manufacturer, and no Aftermarket source is offered for this OE number, so there is one option here and the price on this page belongs to it. Where a part does have a second source, both tiers are shown on the page and priced there so you can decide. This one does not. If you want alternatives investigated for a full exhaust job, send the list of numbers through the enquiry form.