Rear Exhaust Muffler for BYD Seal 05 DM-i, OE 14828217-00

This section carries two references, the OE number 14828217-00 and HA5HA-1203030, and either one brings you here. Exhaust parts are often identified from paperwork rather than from the part itself, so if what you have is a number off an old job sheet, check it against both numbers above. The centre section of the same system carries a reference that is only a digit or two away, so a near match is not good enough. Send anything you cannot settle through the enquiry form.

Delivery time is confirmed with your quote. They run consecutively, so book the ramp time against the later date. If you are replacing more than one section of the system, order them together so they arrive together instead of leaving the car in pieces between deliveries. Use the enquiry form if you want the timing confirmed against a specific date.

It arrives as one long carton. The packaging details are shown on this page. Arrange for it to be received somewhere it can be laid down instead of propped in a corner. Look the carton over before you sign for it, and if a corner is stoved in, photograph it before the box is opened. Tell us about any transit damage before the part goes near the car.

Metal is what this section is made from, with no protective finish mentioned beyond that, so check what you actually have in front of you before it goes up on the ramp. Surface marks from transit are cosmetic on a part that lives under the car, but a dent in the pipe wall is another matter, so sight along the whole length first. Nothing here describes clamps, hangers or gaskets, so anything else the job needs has to be sourced separately from this page.

This section sits at the rear of the vehicle and underneath it, so the car needs to be up on a ramp or on stands before anyone can reach it. It is the rear section of the exhaust system and not the centre pipe, which is a separate listing under its own number. Nothing here describes the joints or the mounting rubbers, so work from what comes off the car. The fitment table on this page shows the builds matched to the BYD Seal 05 DM-i.

There is one version listed here, and it is the Original/Genuine part from BYD. No Aftermarket manufacturer is offered for this OE number, so the page shows a single option at the price displayed here. That is the only option available and there is no more to it. If an alternative is added later it will appear on this page with both tiers priced together, and you would choose between them. Use the enquiry form if you want us to look for something else in the meantime.