Subframe Frame Bushing II (Front) for Fangchengbao Bao 8, OE 15830717-00

Two references lead to this same bushing. The OE number is 15830717-00 and the alternative reference is SFHA-2801300B. If the marking on the part you have taken off matches either one, you are in the right place. If it is close without being the same, that is a signal to stop rather than to press on, because this listing is named Frame Bushing II and the numeral is doing real work. Send what you can read through the quote route with a photograph of the old part and its label and we will match it to the correct listing before you commit.

This bushing is safety critical, so let a workshop do the fitting. It mounts to the subframe underneath the car, so reaching it means getting the car up, and the fasteners around it are not the sort to guess at. Pass the OE number 15830717-00 to whoever does the work so the part on the bench is the right one.

The delivery time is 8 to 25 days, from order to door. If the car is off the road, the total is what to plan against rather than the shorter of the two. Where you want the current position before committing, ask through the quote route quoting 15830717-00 and we will look at the listing and come back to you. The shipping cost for your country is shown on this page and confirmed at checkout before you pay.

Rubber is the material for this bushing. That matters mostly for storage and handling before fitting, so keep the part away from heat and out of direct sun while it waits, and unwrap it when the car is ready rather than weeks beforehand. Nothing here describes the compound or how it performs once it is on the car, and none of that will be guessed at. If you need more than the material to make the decision, ask through the quote route with the OE number 15830717-00.

The mounting position for this bushing is the underbody, with subframe and crossmember parts at the front of the car. It is not something you can see with the bonnet open, so the position has to be confirmed from below before you buy. That is the honest answer for a part of this kind, because the identification is harder than the purchase. Once the position is settled, match the OE number 15830717-00 against the old bushing and check your variant in the fitment table on this page.

Only the Original/Genuine bushing is available here, made by BYD. No Aftermarket version exists for this OE number, which is why the page shows one tier rather than two. If you would like us to check what else might be sourced for your car, use the quote route with the OE number 15830717-00. If you already know the position is right, the remaining step is your variant, and the fitment table on this page is where to settle that before the order is placed.