Rear Stabiliser Bar Link for BYD Seal 06 & Dolphin, OE 12740276-00

This link fits a good number of BYD models rather than a single one, so matching by car name alone leaves room for error. Use the fitment table on this page and check your model and model year first, then the body variant, against what is on your V5C. This part also carries a second reference for the same item, SC2E-2916020, which gives you another way to confirm the match from the part itself. If your car is not shown but looks close, send us the reference from the old link through the quote route.

There are two tiers here and both are priced on this page. Original/Genuine is the BYD part built to the vehicle manufacturer's specification. Aftermarket is a part made by an independent manufacturer for the same application, and the manufacturer is not named for this link. Both are listed in New condition and both are tied to the same fitment table on this page, so fitment does not change between them. Match the OE number on the old link to the one you order, whichever tier you choose.

Look again at what is marked on it. This item carries the OE number 12740276-00 and is also known as SC2E-2916020, and both point at the same record. Small parts like this often show only the second reference, so it can be easy to think you are holding the wrong item. Read the whole string before you decide. If neither appears on yours, or the marking has corroded away, use the quote route on this page and tell us the model from your V5C so we can work back to the correct link for it.

Yes. This link is safety critical. It is a rear suspension part rather than a trim or comfort item, so correct fitting affects how the car behaves on the road. Have the work done by a qualified technician with the car properly supported, and have the suspension checked over once the job is finished. We publish no torque values or removal sequence here, because that detail belongs in the vehicle manufacturer's own workshop material. Order against the OE number 12740276-00 and confirm your car in the fitment table on this page first.

The delivery time is 8 to 25 days, from order to door. The packaging details are shown on this page. Book the garage against the later end of the window rather than the earlier one. If the job cannot wait that long, use the quote route on this page and ask before you order. The shipping cost for your country is shown at checkout before you pay.

This link is made of metal. That is worth knowing when the old one comes off, because the OE number is usually marked into the metal itself and can be read once the dirt is cleaned away. If your workshop needs that in writing, check the OE number against the fitment table on this page before you order.

This one sits underbody towards the rear of the car, connecting to the stabiliser bar, and it is reached from underneath rather than from anywhere inside. The car needs to be up and the rear wheel area clear before you can get at it. Because it lives low down and out of sight, the fixings are usually the dirtiest part of the job, so allow time for that. Confirm the OE number 12740276-00 against the old part once it is out, then check your model against the fitment table on this page.