Rear ABS & EPB Wiring Harness (Right) for BYD Seal 05, OE 13019170-00

This listing is for the right side, at the rear of the car. Sides are not interchangeable, so before ordering, have the old part in front of you and check which side it came from. Compare the OE number on this page, 13019170-00, against the marking on your old sensor and harness. If the side or the number does not match, this is not the right one for your car. Keep the old part to hand while you order, rather than relying on memory of which side it sat on.

Check the OE number stamped or printed on the old harness before ordering, since 13019170-00 is also listed as HA2FF-3630320 and either reference should match what comes off your car. This is a right rear item, so confirm the side as well before you order. If the numbers agree, you can order with confidence. Where they do not match, do not fit the part, as the plug or bracket may be wrong for your car. If you are at all unsure, send a photograph of the old part and its label through the quote route on this page and it can be confirmed against the OE number.

This harness is listed under OE number 13019170-00, also shown as HA2FF-3630320. If the marking on your old part reads differently, do not fit this one on the strength of the description alone. Compare the number stamped or printed on the old harness against the fitment table on this page before you order, since that is what confirms it matches your car. If you cannot find a number to check, take a clear note of where it should be and get in touch before buying.

Fitting this correctly matters because it carries signals for the wheel speed sensor and the electric parking brake, so whether you tackle it yourself depends on confidence working underbody and with brake related wiring. Before you start, check the number stamped on the part you are taking off, and make certain it reads 13019170-00 or the alternative reference HA2FF-3630320. If you are not confident reading that number or connecting the wiring correctly, it is safer to have a garage carry out the fitting.

Delivery time is confirmed with your quote. This part is made for the BYD Seal 05, so check the model and the model year as written on your registration document before ordering, since it is matched to that specific model and to the rear, right hand side only. The shipping cost is confirmed with your quote.

This harness is made of plastic and finished in black. Because it is plastic rather than metal, treat it as a single item to fit as supplied rather than something to bend or force into place. To be sure you have matched the right part, look up the alternative reference HA2FF-3630320 alongside the OE number 13019170-00, since this part is listed under both, which helps if your old part or a catalogue only shows one of the two.

Yes, only the original is listed for OE 13019170-00, with no alternative shown on this page at present. That does not mean nothing else exists, only that nothing else has been listed here yet. If you would rather price an alternative before ordering, use the quote route on this page and ask about other options for this harness. Someone can then look into what else might be available and come back to you with pricing.