Front Bumper Reinforcement Beam for BYD Yuan Pro & S2, OE 12772859-00

Both are. SCED-8400010/77 is the other reference for this front bumper reinforcement beam, so seeing it on the part you have removed does not put you on the wrong page. On a beam the marking is usually stamped or printed on the rear face, where the bumper cover kept it out of sight, so that is the place to look once it is off the car. If the beam is damaged to the point where nothing is readable, send photographs of the mounting points through the quote route.

Delivery time is confirmed with your quote. It is a long item, so give some thought to where it will sit once it lands if the car is not going into the workshop straight away. If a body shop is holding a slot for you, give us the date through the quote route and we will say what looks achievable.

The packaging details for this beam are shown on this page. Its length is what governs how it travels, so it moves on an oversize or pallet service instead of a standard parcel round. The delivering vehicle needs somewhere sensible to stop and somebody has to be present to take it in. Check the ends of the packaging for crush damage before you sign. If access at your address is tight, tell us through the quote route beforehand.

This beam is made of metal, which for something of its length makes it manageable but far from flimsy. Straightness is what matters on a part like this, so unwrap it when it lands and lay it against the one you have taken off. The mounting faces and hole positions should agree. If they do not, stop there and send photographs through the quote route so we can check the reference against your car before anything is refitted.

This beam sits at the front of the car and on the exterior side of the body rather than inside the cabin, so it is reached once the front bumper cover and its fixings are out of the way. That is worth knowing before you quote the job, because the visible panel work comes off first and goes back on last. Check the fitment table on this page for your model and year, and if the front of your car has been repaired before, compare the mounting points on the old part carefully.

The beam is listed in the Original/Genuine tier from BYD, and nothing sits against 12772859-00 in the Aftermarket tier. The page therefore shows one version rather than a choice between two. That reflects what we can source under this reference rather than anything about the part itself. If you have been shown an alternative beam described as suiting the same application, send us the reference and any photographs through the quote route and we will check it against our own data before you order.