Left Front Brake Dust Shield for BYD Yuan PLUS, OE 12902586-00

It is handed, and this is the left one. Sides are read from the driver's seat facing forward, so this shield belongs behind the front brake on your left. This is the left front dust shield for the BYD Yuan PLUS, so it will not serve as a right hand part turned over. The quickest check is to hold the removed shield against the listing photograph in the same orientation it sat on the car. Order the right hand version if the curve runs the other way.

Yes. HAD-3501115 and 12902586-00 both identify this left front dust shield, so a part carrying either reference is the one described here. Watch the last digits in particular, since the right hand shield sits under its own separate reference and the numbers run close together. Read the marking after cleaning rather than before. Where the old shield is too far gone to read at all, send the vehicle details through the quote route on this page rather than ordering on the strength of a similar number.

This part is safety critical, so treat it as workshop work. The shield mounts at the underbody behind the left front brake, and reaching that position means taking apart an area where everything put back has to be right. There are no tightening figures or fitting steps on this page, because the vehicle manufacturer's own documentation is the proper source for them. Someone with the right equipment and access to that data should do the job, particularly if the car goes back into daily use straight afterwards.

Allow 8 to 25 days for delivery, counted from your order to your door. Read them in that order when you plan the job. Where a date cannot move, say so through the contact route on this page before the order is placed rather than after it. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old part against OE 12902586-00.

It is metal, supplied new. Keep it flat in the boot and out from under heavier items, because a thin shield that has been leaned on will not sit flush when it goes up against the car. Offer it up against the old one first and check the fixing holes agree before anything is bolted.

Not from this listing. Only the Original/Genuine tier exists against this reference, because this part names BYD as the genuine manufacturer and carries no aftermarket manufacturer beside it. Where a part offers both, two tiers appear on the page. Here it offers one, so the price shown is the only one for 12902586-00. If you want the alternatives looked at rather than assumed away, use the quote route on this page with your vehicle details and we will tell you what the catalogue can offer.