Rear Door B-Pillar Seal (Left) for BYD Qin PLUS EV, OE 12461097-00

This is the left hand seal. The simplest check is to open the rear door on the left and look at the strip you intend to replace. If you need the matching right hand seal as well, ask us and we will point you at that listing rather than have you order this one twice. Keep the old left rear door b pillar sealing strip until the new one is fitted, in case the two need comparing.

The reference HAD-6207411A belongs to this same seal, alongside the BYD number 12461097-00. Seals rarely carry a legible marking after years in a door aperture, so do not be surprised if you cannot find one at all. If you can read something and it matches either of those references, you are in the right place. If it matches neither, or there is nothing to read, use the fitment table on this page and send your vehicle details through the quote route so we can confirm the reference.

Delivery time is confirmed with your quote. If the seal is being replaced as part of wider door work, order it early enough that it is on the bench while the door is apart rather than after it has been put back together. If the timing needs pinning down, ask us through the quote route on this page before you place the order.

This seal travels as a long parcel rather than a small box, so it is handled differently in transit and needs somewhere it can be left if you are out. Give us a delivery address where a long item can be taken in. Keep the packaging until you have checked the seal along its whole length, and do not fold it tightly while it waits to be fitted.

Rubber is the material for this seal, and it is supplied new rather than salvaged from another vehicle. Weight is not the issue with it, length is. Store it laid out flat or in a loose coil rather than creased, and let it come up to room temperature before it is offered to the door aperture. Compare it against the strip you are removing, end to end, before anything is pulled off the car.

The colour is black and the seal arrives in that finish, so there is nothing to paint or otherwise finish before it goes on. The listing places it at the door aperture rather than on a painted panel, so it is not a part that gets sprayed to match the body. If the strip on your car is a different shade, that is worth telling us through the quote route with your vehicle details, because it may point at a different specification and a different reference.

This seal is listed in one version only. No Aftermarket entry sits against 12461097-00, so the Original/Genuine BYD part in black is the whole of the offer on this page. Where we do hold two tiers for a reference they appear together and you choose between them, but here there is only the one. If you would like us to look for another supply route for the left rear seal, use the quote form on this page and give us the vehicle details along with the OE number.