Rear Torsion Beam Mounting Bracket (Right) for BYD Seal 05, OE 12377276-00

This is the right-hand rear torsion beam mounting bracket, so it sits on the right of the car towards the back. Sides are worked out from the driver's seat facing forward, not from standing at the boot looking in. The left-hand version is a separate listing with its own OE number, and one will not stand in for the other. Before ordering, get the car up on a ramp or axle stands and read the marking on the bracket you are replacing, then set it against the OE number 12377276-00 shown on this page.

This bracket is carried against a spread of BYD models, so the Seal 05 named in the title is not the only car it suits. The model name on its own settles very little, because trim and build year change what is fitted underneath. Open the fitment table on this page and find your exact variant instead of stopping at the badge on the boot. If your car is listed and you want a second check, read the number on the bracket already fitted and compare it with OE 12377276-00 before you order.

It can be. This bracket is also catalogued as HAD-2810080, so a supplier or workshop label showing that reference points at the same item sold here under OE 12377276-00. Numbers differ because the same part appears under more than one numbering system. Clean the old bracket off and read every marking on it, including anything stamped under the road dirt, then compare what you find against both references printed on this page. If your number matches neither, send a photograph of the old bracket and its label through the quote route and we will confirm it against the OE number.

Yes. This bracket is flagged as safety critical, which means it carries load at the rear of the car and a poor fit shows up in how the car behaves on the road. The job needs the vehicle raised and properly supported before anything comes apart. Tightening figures belong to the vehicle maker and are not published here, so the fitter needs the correct data for the Seal 05. Book it with a garage that can put the car on a ramp and check the rear of the car once the new bracket is on.

Delivery takes 8 to 25 days from your order to your door. Get the order placed before the garage slot is booked, so the ramp time is not spent waiting on a delivery. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the OE number on your old part against the one on this page.

Metal, finished in black. It is an underbody component, so you will be handling it with the car raised and it can be wiped down and offered up without the care a moulded trim part would need. Make sure the mating faces on the body are clean first, because grit trapped behind a metal fixing stops it seating flat. Nothing beyond the material and the finish is given here, so use the images and the fitment table on this page for the rest.

Because only the Original/Genuine version is sourced for this one. It is a BYD part and no Aftermarket equivalent has been brought into the catalogue against this OE number, so there is a single option on this page instead of two tiers to weigh up. That reflects sourcing and nothing else. If an Aftermarket equivalent is taken on later it will appear on this same page with its own price. To ask whether anything is in progress, send OE 12377276-00 and your vehicle details through the quote route.