Boot Seal Seal for BYD Seal 05 & Qin PLUS, OE 12461111-00

Your old boot seal may be marked HAD-5407115A rather than 12461111-00. Both references belong to this same item, so either one takes you to this listing. In practice a seal that has been on a car for years will often have nothing readable left on it, and that is normal. Where you can read a number and it matches neither reference, send it to us with your vehicle details through the quote route. We would rather check it against our fitment data first than have you order on a guess.

Delivery time is confirmed with your quote. The packaging details are shown on this page. Because a boot aperture seal is usually fitted alongside other work at the rear of the car, order it far enough ahead that it is sitting in the workshop when the car goes in. If you need a firmer read on the current position before committing, ask us through the quote route on this page and we will tell you what we know.

This one is well outside normal small parcel territory. The packaging details are shown on this page. Long items travel differently, so make sure the delivery address can take a long item and that somebody is there to receive it. When it arrives, unpack it along its full length and check it end to end before the car is booked in, rather than finding a problem with the boot already stripped.

It is made of rubber. The challenge with it is the shape rather than the weight. Keep it in a loose loop while it waits to be fitted, out of direct sun and away from anything that would crease it. Before fitting, run it against the seal coming off the car and compare the profile and the overall run, because the two should correspond along their whole length.

The colour given for this seal is black and it arrives that way, so no painting or finishing is needed before fitting. It is an exterior part at the rear of the car, which means it will be seen whenever the boot is open, but it is not a painted panel and is not meant to be treated as one. If the seal currently on your car is not black, tell us that through the quote route with your vehicle details before ordering, because it may indicate a different specification.

The mounting position for this one is exterior and its longitudinal position is rear, so it belongs at the back of the car around the boot aperture rather than inside the cabin. There is no left or right version, so there is nothing to choose between. Check the fitment table on this page for your own build, then compare OE number 12461111-00 with anything you can read on the seal already fitted before you place the order.

One version of this seal is listed and no other. Nothing sits at the Aftermarket tier against 12461111-00, so the Original/Genuine BYD part is the only option shown on this page. Where both tiers exist for a reference we display them together and let you weigh them up, which is not the case here. If you would like us to look for a second supply route to the same seal, use the quote form on this page and include your vehicle details and the OE number.