Front Door Inner Belt Weatherstrip (Left) for BYD Seal 05, OE 12225824-00

The left, and the front door on that side. Sides are given as they read to someone sitting in the car facing forward. This one is the inner belt strip, which is the piece along the inside edge of the window opening rather than the outer strip on the door skin. The right hand front door strip is a separate listing with its own OE number. Work out the door first, then check that you are replacing the inner strip and not the outer one before you order.

This item has two references, the OE number 12225824-00 and HAD-6107117. Either one identifies the same left front door inner belt weatherstrip. Markings on a rubber section are often moulded into the back face and can be hard to read once the strip has been pulled off, so look along the whole length before concluding there is no number. If you cannot recover one, use the fitment table on this page to match your car rather than guessing from the appearance of the old strip.

Delivery time is confirmed with your quote. If the old strip has already been pulled off the left front door, the window opening is exposed for that whole period, so it is better to leave the original in place until the new one has arrived. The shipping cost is confirmed with your quote.

It travels as a long parcel. Length is the thing to plan around, and the packaging details are on this page. Make sure the delivery address can take a long parcel and that there is somewhere safe to leave it if you are out. Do not ask for it to be folded or shortened to fit a smaller space, since the strip needs to stay straight.

Rubber is the material for this strip. That tells you it is a flexible section rather than a rigid trim, so it can be handled around the curve of the window opening without being forced. It also means the item should be stored flat or gently coiled rather than creased if you are not fitting it straight away. Compare it with what you have taken off the left front door. A rigid moulded piece is something else, and its number should be checked against 12225824-00.

No. This strip is black and it is supplied in that finish, so it goes on as it comes. The belt strip is seen along the window line whenever the door is open, which is why the finish matters here at all, but a rubber section of this kind is not something to spray. Fit it as delivered and it should read the same as the strip on the opposite front door. If your car has a different trim treatment along that edge, compare the old strip against the images on this page first.

Not here. The strip is listed in the Original/Genuine tier only, with BYD as the genuine manufacturer, and no Aftermarket equivalent exists under the same OE number. That is why one option shows rather than a pair. Where both tiers exist on a product, they appear together on the page and are priced there. If an Aftermarket version of the left front door inner strip would suit you, put 12225824-00 through the quote route with your model as the fitment table on this page states it.