Seat Belt Height Adjuster for BYD Seal 05 DM-i, OE 12225928-00

Very possibly. This adjuster is known under two references, OE number 12225928-00 and HAD-5811050, and either one points to this part. Garages often quote whichever reference their own system shows, and that is frequently the second form. Read the number back to them digit by digit and check it against the pair printed here. If what they have given you matches neither, do not order on the strength of a description. Send the reference and the vehicle details through the quote route so it can be confirmed first.

Have it done by a qualified technician. This part is safety critical, and it sits in the seat belt system where the consequence of a poor fit is not something you find out about until it matters. A trade fitter will have the correct procedure and tightening figures for your car from the manufacturer's own information. None of that detail is given here, so this page does not attempt to state it. Book the work in before the part arrives so the car is not standing about.

Allow 8 to 25 days for delivery, counted from your order to your door. Since the fitting wants a technician, ring the garage and pencil in a slot for after the parcel is due rather than the week you order. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old part against OE 12225928-00.

Metal. A metal component in a restraint system is worth inspecting the moment it comes out of the packaging, because knocks in transit show up as marks or distortion that you can see and feel. Run your eye over it before it goes anywhere near the car and hand it to the fitter in the state it arrived. The material is all that is given for this part, so any specification beyond that is not something this page will state.

Inside the cabin. The mounting position given is interior, which puts it within the trim rather than anywhere under the bonnet or beneath the floor, and it works with the seat belt in that area. No side is stated for this reference, so nothing here tells you it belongs to the left or the right of the car. That being so, have the fitter identify the exact position from your own vehicle. The fitment table on this page shows which cars it applies to.

This reference is carried in the Original/Genuine tier only, manufactured by BYD, and no Aftermarket part is available for OE number 12225928-00. On a component that is safety critical, a single sourcing route is not unusual. What you see here is therefore the whole choice for this adjuster. Should you need something looked into further, the quote route takes a photograph of the old part and its label along with the reference you have been given, and it can be checked against the OE number before you commit to anything.