Rear Upper Control Arm for BYD Sealion 06 EV, OE 15589624-00

The fitment table on this page runs long for this arm, because the same rear upper design is carried across a good spread of the range. A long table is useful but it is also where mistakes happen, so work it the careful way round. Find your own model and variant in the table first, then check the OE number stamped on the arm you are taking off against 15589624-00. If your car is in the table but the number on the old arm reads differently, stop there and put it through the quote route before ordering.

It may well not be. Suspension parts collect a second number when the supplier changes or the pressing is revised. The stamping normally sits on the flat of the arm and will be under road dirt, so clean it back before you read it. Anything that matches neither reference should go through the quote route with a photograph of the part and its label, and we will check it against this item rather than let you guess.

Yes. This one is flagged safety critical, and a rear upper arm sits directly in the path of how the car steers and stops. That means a properly equipped workshop, the correct fixings, and a four wheel alignment afterwards, because geometry moves the moment an arm comes off. We do not publish torque values or a fitting procedure, since none of that is given for this part and guessing at it would be worse than saying nothing. Have the vehicle checked over by your fitter before it goes back on the road.

Allow 8 to 25 days for delivery, counted from your order to your door. Anyone needing a firmer date should use the quote route first, giving OE 15589624-00, and we will come back on where this particular arm stands. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old part against OE 15589624-00.

Metal is the material given for it, and we will not stretch that into a grade or a treatment that nobody has written down. For a suspension arm the useful point is that you are replacing like with like against the BYD original, and that a metal arm shows its condition honestly if you look at it in daylight. The finish is black as supplied. Compare the new one against the old before it goes up, particularly the bush eyes and the ball joint seat, and hand anything that looks off to your fitter.

Underbody, at the rear of the vehicle and in the upper position of the suspension. No side is given for this one, so do not assume it is handed. All of the work happens from below with the weight off the wheel, so it wants a lift or rated stands, and it wants the fitment table on this page checked before the old arm comes out.

Because none is offered. The Original/Genuine tier from BYD is the only line listed for this OE number, and no Aftermarket price sits behind this listing. On a part flagged safety critical we would rather show a single supply we can stand behind than pad the page with an option we cannot fill. The price shown on this page is therefore the whole picture. If you want us to look for another source, send 15589624-00 and your vehicle details through the quote route and we will report back.