Electronic Throttle Body for BYD Tang DM-i, OE 12282801-00

It is used across a broad set of BYD models, so the badge on the car will not narrow it down far enough on its own. Go to the fitment table on this page and match your model and build year in one row, with the body style checked against the same line. Engine bay parts are the ones where a near miss costs the most time, so if two rows look similar, send a photograph of the old part and its label through the quote route and we will confirm it against the OE number before you place the order.

It is. This part carries the OE number 12282801-00 and under the alternative reference F3-3765010B, and either one identifies the same assembly. The label on a throttle body normally sits on the housing near the connector, where heat and cleaning fluid can make it hard to read. Take a photograph of it before you disturb anything. If the label has gone entirely, use the fitment table on this page and send a photograph of the old part and its label through the quote route so we can confirm it against the OE number.

The delivery time is 8 to 25 days, from order to door. If the car is not running and you need to know where a specific order stands, ask through the quote route with the OE number 12282801-00 rather than waiting to see what happens. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old part against OE 12282801-00.

Metal. Keep it boxed until the car is ready, because the bore and the sealing face are what matter here and both are easily marked on a bench. When you do unpack it, compare the flange and the connector position against the old unit before anything else comes apart on the car.

In the engine bay. This part has no left or right and no front or rear version, which means it is not one of a handed pair and there is only one place it goes. Access is from above with the bonnet up rather than from underneath, so no ramp is needed simply to look at the old one. Read the label on the fitted unit and check it against the fitment table on this page before you order.

No Aftermarket equivalent is offered for this assembly, so the page shows the Original/Genuine part from BYD and nothing beside it. Where both tiers exist on a part, they appear on the same page with the maker named against each so the difference is visible before you buy. That comparison is not there for this one. If you want an equivalent looked into, send the OE number 12282801-00 and a photograph of the old part through the quote route and we will tell you what can be found.