EV Wordmark Badge for BYD Sealion 06 EV, OE 12957133-00

Badges look interchangeable and often are not, so use the fitment table on this page instead of the model name. The wordmark has to match the lettering and the mounting arrangement your car left the factory with, and a badge that suits a neighbouring model will sit wrong or leave the original adhesive footprint showing. Find your exact variant and year in the table before ordering. If your car is not clearly listed, send a photograph of the old part and its label through the quote route and we will confirm the right badge for you.

The same badge can appear under more than one reference. This one is catalogued as OE number 12957133-00 and also known as STEB-3921700, so a quote carrying either is pointing here. Old badges rarely carry a readable number once they are off, since the marking tends to be on the backing rather than moulded in. If your reference matches neither, work from a photograph of the old part and its label instead and send it to us through the quote route, and we will identify the wordmark from that rather than by eye.

Allow 8 to 25 days for delivery, counted from your order to your door. Badges are usually fitted alongside other work, so if the car is going in for paint or panel work, order early enough that the badge is not the thing holding the job up. Quote the OE number if you contact us about the order, because a description on its own will not identify a wordmark.

The material is plastic. A moulded badge is light, which is why it can be held on with adhesive rather than fasteners, but it will distort if it is forced or if heat is used carelessly during fitting. Handle it by the edges and keep the back face clean. Nothing here covers the adhesive or how the old one is removed, so check what is on your own car and follow the vehicle manufacturer's method for preparing the surface before anything is pressed into place.

This wordmark mounts on the exterior of the body, where weather and washing reach it. Two things follow from that. The surface underneath needs to be properly clean and dry before fitting, and the position needs to be right first time, because an exterior badge is not something you want to lift and reposition. Mark the location from the original before you remove it. No fixing method is given here, so confirm how your own car holds the wordmark in place.

There is one version of this wordmark. The Original/Genuine part carries the BYD name and no Aftermarket version is offered for OE number 12957133-00, so the page shows a single tier. With exterior lettering the exact form matters, since a badge that is nearly right is obvious on the car from several paces away. If you have found something described as a match, compare the OE marking instead of the photograph, and use the quote route if you would like us to check a reference first.