Passenger Airbag Wiring Harness for BYD Tang EV, OE 10795963-00

Several BYD models fit this harness, and the Tang EV is only the starting point. Looms are altered between build years and trim levels on the same model, so the model name on its own is not enough to order from. Read the fitment table on this page against your own car, then look for the reference on the harness you intend to remove. If your car appears on the table but you cannot read a number, send a photograph of the harness and its label through the quote route and we will match it against the OE number before anything is arranged.

Not on its own. The OE number here is 10795963-00 and the same harness is also known as S6-5820220. Labels on a loom are small and often half hidden, so look along the connector bodies and under the tape wrap for either string. Paperwork from an earlier repair may quote the other one. Because this part goes through the quote route, send whichever reference you can read together with a photograph of the harness and its label, and we will confirm which one it matches before you commit to anything.

Yes. This harness is safety critical and it belongs to the passenger airbag circuit. Work of that kind is for a qualified technician following the correct procedure for disabling and re-enabling the restraint system on your car. Do not approach it as an ordinary electrical repair in a driveway. Use a workshop that can confirm the system state afterwards with proper diagnostic equipment. When you send the quote request through the route on this page, say who will be fitting it so the paperwork goes to the right address from the start.

The delivery time is 8 to 25 days, from order to door. If the timing does not suit a booked workshop slot, use the quote route on this page and we will talk through what can be arranged. The shipping cost for your country is shown on this page and confirmed at checkout before you pay. Before you order, check the number on your old part against OE 10795963-00.

Plastic is the material for this one, which describes the connector housings and the sheathing over the loom rather than the conductors running through it. Compare the housings on your own harness against the images on this page before you enquire. If you are unsure which variant your car carries, send photographs of the connectors and the OE number with the quote request.

This harness sits inside the cabin, so reaching it means trim removal rather than work under the bonnet. No side is given for it and nothing describes the run it follows, so use the images on this page along with your own inspection to identify the loom you intend to replace. Describe where you have found the fault when you send the enquiry and give OE number 10795963-00, so the right part is identified before a route and a price are worked out.

Only the Original/Genuine version is available, carried under BYD. No Aftermarket line exists for OE number 10795963-00, so there is one option here rather than a choice of tiers. For a restraint circuit part that is not unusual. Since this one is handled through the quote route in any case, the enquiry comes back against the genuine reference. If another supplier has quoted you a part they call equivalent, send their number with a photograph of your old harness and we will say whether it matches OE number 10795963-00.